Votos - 3, Puntuación media: 4.3 ( )

Fabricar: Centro Tamaño del archivo: 6.3 mb Nombre del archivo: Idioma del manual:

Then, tighten further using the Wrench provided in the hardware pack. EI EH EG Back view Close up 2 2. Ensure that the wheels are firmly locked in the “ON” position before continuing. Assemble the left side panel (EA) and the right side panel (EB) to the bottom shelf (EG). EA EB #1 - .” - 20UNCx13 Screw (x6) EG Front view #4 - o7 Lock Washer (x6) #5 - o7 Washer (x6) Close up 6 ASSEMBLY INSTRUCTIONS 3 3. Attach the Front Brace (CL) to the Left and right cart side panels (EA and EB) TIP: One person should align the left side, while the second person assembles the right side. CL EB #6 - NO. 10-24UNCx10 Screw (x4) EA #7 - o5 Lock Washer (x4) #8. o5 Washer (x4) Back view 4 4. Assemble the Left and right Pillars (EC and ED), to the cart side panels, as shown in figure A and B. Next, assemble the left and right pillars to the Front brace (CL) and the Bottom shelf (EG), as shown in figure C and D. TIP: One person should align the left side, while the second person assembles the right side. EC A #6 - NO. 10-24UNCx10 Screw (x8) CL #7 - o5 Lock Washer (x8) D B #8. o5 Washer (x8) C ASSEMBLY INSTRUCTIONS 5 THIS STEP REQUIRES 3 OR MORE PEOPLE. DO NOT ATTEMPT ALONE. EXTREMELY HEAVY. 5a. Position the top lid and burner box assembly (A and B) onto cart assembly (C) as shown. 5b. Use the hardware to connect both parts, on the left and right sides, at the three points indicated in Figure B and C. A C B #6 - NO. 10-24UNCx10 Screw (x6) #7 - o5 Lock Washer (x6) #8. o5 Washer (x6) ASSEMBLY INSTRUCTIONS 6 6. Attach the upper back panel (CO) to both the left and right side panels (EA and EB). Only install hardware in the bottom portion of the back panel, as shown in figure B. EA CO #2 - .” - 20UNCx38 Screw (x2) EB #4 - o7 Lock Washer (x2) Back view #5 - o7 Washer (x2) B 7 7. Attach the right side shelf fascia (DI) to the right side shelf table (DH), as shown. #6 - NO. 10-24UNCx10 Screw (x3) #7 - o5 Lock Washer (x3) #8. o5 Washer (x3) DI DH ASSEMBLY INSTRUCTIONS 8 TIP: To position the right side shelf, insert the two hooks on the side shelf assembly into the two openings located on the right upper side panel (BC). 8. Assemble the right side shelf assembly to the cart assembly, as shown in figure B. DH BC * #2 - .” - 20UNCx38 Screw (x1) * DI #3 - .” - 20UNCx16 Screw (x4) #4 - o7 Lock Washer (x5) #5 - o7 Washer (x5) B 9 9. Attach the left shelf fascia (DB) to the left side shelf table (DA). Front DC #6 - NO. 10-24UNCx10 Screw (x3) #7 - o5 Lock Washer (x3) #8. o5 Washer (x3) DB DA ASSEMBLY INSTRUCTIONS 10 TIP: To position the left side shelf, insert the two hooks on the side shelf assembly into the two openings located on the upper left side panel (BB). 10. Assemble the right side shelf assembly to the cart assembly, as shown in figure B. BB * #2 - .” - 20UNCx38 Screw (x1) * DA DB #3 - .” - 20UNCx16 Screw (x4) A #4 - o7 Lock Washer (x5) #5 - o7 Washer (x5) B 11 11. Remove the hardware that is pre-assembled to the side burner valve bracket(CC), as shown in figure B. Insert the side burner valve stem through the rear of the left side shelf fascia(DB). Assemble the side burner valve to the side shelf fascia, using the hardware removed. Assemble the side burner control knob (#12) to the side burner valve (CC). Hardware may be included with the hardware pack. 12 DA DB #12. Knob (x1) CC B ASSEMBLY INSTRUCTIONS 12 12a. Position the side burner (DD) through the opening in the left side burner drip pan (DC). DD DC A 12b. Make sure that the burner engages the side burner valve as shown in figure B. Underside view B 12c. Using the Wing nut provided, assemble the side burner to the side burner drip pan (DC), as shown in figure C. #13 - Wing Nut (x1) C C ASSEMBLY INSTRUCTIONS 12 Cont’d 12d. Attach the end of the side burner electrode wire (DE) to the underside of the side burner electrode, as shown in figure D. Ensure that the wire is pushed in firmly. 12e. Place the side burner cooking grate (DG) into postion on the side burner shelf, as shown in figure E. DE D DG E 13 For propane model only. 13. Insert the flat end of the Tank Exclusion Bar (CP) into the groove on the upper back panel (CO), as shown in figure B. Next, attach the tank exclusion bar (CP) to the Front Brace (CL) using the self tapping, as shown in figure C. CP #9 - ST4.2x10 Tapping Screw (x1) CL CO CP C B ASSEMBLY INSTRUCTIONS 14 TIP: Before attempting to assemble the door (EF) to the right pillar (ED), locate the two clasps on the door Hinge. Next, locate the two small openings on the right side pillar. 14a. Hold the door perpendicular to the BBQ Cart. Align the two clasps on the door hinge (EF), with the two holes on the right side pillar (ED). Once aligned push the two clasps into the openings, and immediately push down to lock clasps in place. EF ED 14b. Assemble the door (EF) to the right pillar (ED), as shown in figure B, using the screws provided. #11 - NO. 8-32UNCx10 Screw (x4) 15 15. Place the flame tamers (BG) into the burner box. BG Model may not be exactly as shown. ASSE...

Descargar ahora

Introduzca dos números de la imagen: