Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
. . .-2 Front (Right) Avant (droite) Subwoofer Caisson de graves Front (Left) Avant (gauche) Rear of the speakers Arriere des enceintes Rear of the subwoofer Arriere du caisson de graves Center Centrale VS350H VS350H 7.1 channel speaker system Systeme d’enceintes a 7.1 canaux 6.1 channel speaker system Systeme d’enceintes a 6.1 canaux 5.1 channel speaker system Systeme d’enceintes a 5.1 canaux Bracket Support de montage Center Centrale Center Centrale Center Centrale LINE IN BASS BOOST MAX MIN LEVEL MAX MIN PHASE NORMAL REVERSE POWER SAVE REVERSE OFF POWER ON / STANDBY . Subwoofer Caisson de graves Subwoofer Caisson de graves Subwoofer Caisson de graves Rear Panel Panneau arriere Front Panel Panneau frontal Front (Left) Avant (gauche) Front (Right) Avant (droite) Front (Left) Avant (gauche) Front (Left) Avant (gauche) Front (Right) Avant (droite) Front (Right) Avant (droite) Amplifier Amplificateur BASS BOOST LEVEL Surround (Left) Surround (gauche) Surround (Right) Surround (droite) Surround (Right) Surround (droite) Surround (Left) Surround (gauche) Speaker stand Support d’enceinte PHASE Surround (Right) Surround (droite) Surround (Left) Surround (gauche) Surround back (Left) Arriere surround (gauche) Surround back (Right) Arriere surround (droite) Surround back Arriere surround POWER SAVE Surround (Right) Surround (droite) Surround back (Left) Arriere surround (gauche) Surround back (Right) Arriere surround (droite) Surround (Left) Surround (gauche) English About these Operating Instructions The SA-VS350H/SA-VS150H is a 7.1 channel speaker system consisting of two front speakers, four surround/surround back speakers, one center speaker, and one subwoofer. You can also enjoy 5.1 or 6.1 channel surround sound by joining the surround or surround back speakers using the supplied brackets. It supports Sony Digital Cinema Sound, Dolby* Pro Logic, Dolby Digital, and DTS** etc., and is thus geared towards the enjoyment of movies. * “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. ** “DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc. Positioning the speakers (.) Each speaker should face the listening position. Better surround effect will result if all speakers are set at the same distance from the listening position. Place the speakers as follows: Front speakers: suitable distance to the left and right of the television Subwoofer: on either side of the television Center speaker: on the top-center of the TV set Surround speakers: depends on the configuration of the room The surround speakers may be placed anywhere between position (A) and position (B). See illustrations (.)-1~3 for examples of how to position the speakers. When you use the system for 5.1 or 6.1 channel surround sound (.) [SA-VS350H] Join the surround/surround back speakers using the supplied brackets, and attach the supplied speaker stands to the joined speakers. When you use the 6.1 channel speaker system, we recommend that you use the joined speakers as the surround back speaker. [SA-VS150H] Join the speakers using the supplied brackets, and attach the supplied speaker stands to the joined speakers. Hooking up the system (.) Make sure power to all components (included the subwoofer) is turned off before starting the hook-up. Connect the speaker system to the speaker output terminals of an amplifier. The picture is one example of how to connect the speakers to an amplifier. For details regarding the connections of an amplifier, refer to the operating instructions that were provided with your amplifier. Connecting the speakers (.) . Make sure the plus (+) and the minus (–) terminals on the speakers are matched to the corresponding plus (+) and minus (–) terminals on the amplifier. . Make sure all connections are firm. Contact between bare speaker wires at the speaker terminals may cause a short circuit. . Be sure to tighten the screws of the speaker terminals securely as loose screws may become a source of noise. Setting the amplifier When connecting to an amplifier with internal multi channel decoders (Dolby Digital, DTS, etc.), you should use the setup menus for the amplifier to specify the parameters of your speaker system. 1. Set the speaker size. See the table below for the proper settings. For details on the setting procedure, refer to the operating instructions that were provided with your amplifier. For Set to Front speakers SMALL Center speaker SMALL Surround speakers SMALL Subwoofer ON (or YES) Surround back SMALL 2. Set the crossover frequency. If you use an amplifier with adjustable crossover frequency, it is recommended to select 180 Hz (or close to this figure) as the crossover frequency for your front, center, and surround speakers. Adjusting the subwoofer (.) Front Panel POWER Turns on the speaker system. ON/STANDBY indicator Lights up green when the subwoofer is on. Lights up red when the subwoofer is in power saving mode. Rear Panel LEVEL Rotate to adjust the volume. To...