Iniciar sesión:
Votos - 3, Puntuación media: 4.3 ( )

Manual de usuario Kenwood, modelo KDV-MP6433

Fabricar: Kenwood
Tamaño del archivo: 8.25 mb
Nombre del archivo:
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Otros manuales para este modelo:

Resumen del manual


English Display Control 42 KDV-MP6333/KDV-MP6433 Monitor information display & file selection Displays information on the disc source being played, and selects a file to be played. 1 Display source information Information on the source is displayed on the monitor. This information remains displayed until an image is displayed on the monitor. ! " # " ! Media information Play time and text information is displayed. " Status information Play function setting status is displayed. # Source information display Receiving frequency, band, number of channels, etc. are displayed during radio reception. Play time, title/track/chapter number, setting status of each function, etc. are displayed while playing DVDs, etc. 2 Display disc and file information Information on the disc and the file is displayed. Depending on discs, you can switch the displayed information as you press this button. You can select the information to show when "." and "5" are displayed. 3 Display the file list Audio file, movie file, or picture file list is displayed. 4 Select a file to play from the list • The file list is not displayed if the disc being played does not have an audio file, movie file, or picture file. Display Control Removing operation panel Removes the operation panel. 1Open the operation panel 2Remove the operation panel Antitheft warning lamp • Removing the panel turns off the power. • Since the panel is a precision component, it may be damaged by shock when exposed to vibration or dropped. Store the panel with care after removing it. • Do not store the removed panel in the following places. - Places exposed to direct sun light - Places with high humidity - Dusty places • This unit is provided with a DSI (Security indicator) function. If the "DSI" feature is set to "ON" in the

(page 44), a warning lamp blinks when the panel is removed for antitheft purposes. Removing operation panel Removes the operation panel. 1Open the operation panel 2Remove the operation panel Antitheft warning lamp • Removing the panel turns off the power. • Since the panel is a precision component, it may be damaged by shock when exposed to vibration or dropped. Store the panel with care after removing it. • Do not store the removed panel in the following places. - Places exposed to direct sun light - Places with high humidity - Dusty places • This unit is provided with a DSI (Security indicator) function. If the "DSI" feature is set to "ON" in the (page 44), a warning lamp blinks when the panel is removed for antitheft purposes. Installing operation panel Installs the operation panel. 1Align the operation panel with the main unit Push in the panel aligning the hole in the panel with the shaft at the right of the main unit. 2Install the operation panel Push the left side of the panel into the main unit until it locks. The panel is now installed and the unit is ready for use. Display Control English Setting up various functions Menu Setting up various functions Menu Menu setup Sets up various functions for each source. 1 Source switching Q AMSETUP AUD VOL MENU SCANSTOP M/S RDM REP F.SEL M.RDM OFF DISP SW SRC 2 Set to the menu mode Q AMSETUP AUD VOL MENU SCANSTOP M/S RDM REP F.SEL M.RDM OFF DISP SW SRCMENU 3 Select features to set The features displayed vary depending on the source. Set up each feature 4 • For details on how to set features followed by a page number, refer to the page shown. Display Setting Setting overview Source "CODE SET" Refer to Security code is set. page 46 "BEEP" ON*/OFF Sets beep tone ON/OFF. "CLK ADJ" Refer to Sets the clock. page 48 "DSI" ON*/OFF Sets the antitheft warning LED. "KEY" GRN*/RED Sets the button illumination color. "DISP" ON*/OFF Turns off the display when not in use. "DIM" ON*/OFF Adjusts the brightness of the display according to the surrounding illumination. "SWPRE" R*/SW/AV Sets PREOUT output signal. (KDV-MP6333) "SWPRE" SW*/AV Sets PREOUT output signal. (KDV-MP6433) "AMP" ON*/OFF Specifies whether the built-in amplifier is turned ON/OFF. "ZONE2" R*/F Sets the output destination of the dual zone function sub source. "BMS" FLT* The amount of amplification for +6/+12/ the bass range of the amplifier +18 with BMS function is set. "BMSF" NML*/LOW The central frequency to amplify by BMS is set. "AMP CTRL" Refer to The various settings of LX page 49 amplifier are set. "CRSC" OFF*/ON Switches to Monaural to decrease noise when reception is poor. "NAME SET" Refer to Names the AUX source. page 48 "SCL" AUTO*/MANU Specifies whether the text is scrolled automatically. "AUX"** OFF*/ON Specifies whether to display built-in AUX when the source is selected. "CD READ" 1*/2 Sets the CD read mode. KDV-MP6333/KDV-MP6433 Display Setting Setting overview Source "P/N"** PAL*/NTSC Switch between the signal systems (PAL/NTSC) of the on- screen display. Select the same signal system as that used for the monitor connected to this unit. "A- PRESET" Refer to page 50 Registers/recalls audio settings. "M/V" No settin...

Otros modelos de este manual:
Unidad - KDV-MP6333 (8.25 mb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría