Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
When none is being received, the TI indicator will blink on and off. When a traffic information station is being received, the TI indicator will turn on. When a traffic bulletin begins to be broadcast, "TRAFFIC" will be displayed, and reception will begin at the preset volume. If you are listening to a tape or disc when a traffic bulletin begins, they will automatically be turned off. When the bulletin ends or poor reception is experienced, the tape or disc will begin playing again. — 14 — NOTE Pressing the TI button switches reception to is not returned to when Switching to a Different Traffic Information Station: Use the 4 / . buttons to make an auto seek stations in a certain band. 3 Switching settings Press either the AM The display and setting If the traffic information poor reception, this function station. 4 Press the MENU button to end NOTE • When you are listening to a tape or disc, another TI station. • When the auto TP seek function is turned starts to weaken, the tuner automatically seeks information stations with better reception. • If you are tuned to a station that is not a traffic information station itself but which provides EON services, you traffic information received. • Holding the TI button down for one second or more when function is on in the disc control mode results in a change to frequency display of the traffic information station for five seconds. Presetting Volume for Traffic Preset the volume level to be used for traffic news broadcasts. 1 Tune into the station for which you want to set the 2 Adjust the volume to the desired level. 3 Hold down the TI VOL ADJ button for two seconds or more. The volume level blinks once in the display to indicate that data has been stored. Future traffic information/news broadcasts are heard at the preset level. Auto TP Seek Function When the TI function is on and poor reception conditions are experienced when listening to a traffic information station, another traffic information station with better reception will be searched for automatically. This function is on, when unit is first powered on. Turning Auto TP Seek Function On/Off:1 Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on. 2 Press the . button repeatedly until the Auto TP Seek function appears in the display. Press the 4 button to search in the other direction. The function setting is indicated by "ATPS ON" or "ATPS OFF" in the display, indicating that the function is on or off, respectively. NOTE • The volume cannot be lowered by this function during tuner reception. The volume is only set when it is louder than the listening volume of the tuner. • You can arrange only to listen to traffic information or news bulletins with at preset volume with the volume set at minimum. — 15 — English RDS features News Bulletin with PTY News NOTE You can arrange to have listening source, including Bulletin function is on, the you to set the interval during cannot take place. You can adjust the PTY news period from 10 to 90 minutes for Turning News Bulletin Function On/Off: 1 Hold down the MENU button for one second "MENU" is displayed and the menu mode is 2 Press the . button repeatedly until the News Bulletin function appears in the display. Press the 4 button to search in the other direction. The function setting is indicated by "NEWS OFF" or "NEWS ##M" in the display, indicating that the function is on or respectively. If you choose the received for 20 minutes Setting the interval at the Timeout will be made, meaning continue to be searched for. 4 Press the MENU button to end NOTE • This function is only available if the desired code for news bulletin or belongs to EON-code for news bulletin. • If you turn on the news bulletin function in the the band is switched automatically to the FM band. However, the MW/LW band is not returned to when the function. NOTE Depending on the interval chosen, the "##M" in the display will change when the function is turned on. 3 Changing the Function Setting Press either the FM or AM button. Each time you press the FM or AM button until the desired setting is displayed. Press the FM button to increase the interval, and the AM button to decrease it. OFF O 00M O 10M O 20M O 30M O 40M O 50M O 60M O 70M O 80M O 90M (M= minutes) When you select the news interruption timeout interval, the News function turns on and the NEWS indicator lights up. When a news bulletin is received, "NEWS" will be displayed and reception will begin at the preset volume. Programme Type (PTY) Function Conduct auto seek tuning only on those stations with selected kinds of programmes. 1 Press the 38(PTY) button. “PTY” is displayed, and the Programme Type Selection (PTY) Mode entered. If you make no key input in 30 seconds, the mode will automatically turn off. NOTE You cannot use this function whilst the traffic information function is turned on. NOTE Changing the Display Language to French, German, or Swedish In the PTY mode, hold down the 38...
Otros modelos de este manual:Unidad - KDC-5070R (615.69 kb)