Votos - 4, Puntuación media: 3.8 ( )

Fabricar: Kenwood Tamaño del archivo: 534.33 kb Nombre del archivo: Idioma del manual:

Tuning mode select [AUTO] Switches as follows each time this button is pressed. Tuning mode Display Operation Auto seek “Auto1” Automatic search for a station. Preset station seek “Auto2” Search in order of the stations in the Preset memory. Manual “Manual” Normal manual tuning control. Auto memory entry [AUTO] Memorizes six stations with good reception automatically when pressed for at least 2 seconds. Preset memory [1] - [6] Memorize the station selected when pressing for at least 2 seconds. Preset tuning [1] - [6] Recalls the memorized station. Disc & Audio file play functions Drop open the faceplate Release . • Push the faceplate on the left side, and return it to its former position. Disc play Disc slot Starts playing when a disc is inserted. When a CD is inserted, the “IN” indicator is ON. . • 3 inch (8 cm) CD cannot be used. Attempt to insert using an adapter can cause malfunction. Disc ejection [0] . • You can eject the disc for 10 minutes after switching off the engine. USB device/iPod play USB Terminal Connecting a USB device starts playback. . • For the playable audio file, media, and devices, refer to (page 22). USB device removing [0] Press this button for 2 seconds or longer to select the remove mode, and the remove the USB device. During the remove mode, The 0 indicator blinks. Pause and play Control knob Switches between pause and play each time the center is pressed. Music search Control knob Changes the music when pushing toward left or right. Fast reverses or forwards the music while keeping pushing toward left or right. (No sound is output while playing audio file.) Folder search Control knob Changes the folder containing the audio file when pushing toward up or down. Track/ File/ Folder repeat play [4] Switches between Track Repeat (“Repeat ON”) and OFF when pressed while playing a CD. Switches between File Repeat (“File Repeat ON”), Folder Repeat (“Folder Repeat ON”), and OFF when pressed while playing an audio file. . • The folder repeat operation cannot be performed while iPod is playing. Scan play [2] Successively plays the intro of the music in the disc or folder. Switches between ON (“Scan ON”/ “File Scan ON”) and OFF each time this button is pressed. . • The Scan paly operation cannot be performed while iPod/ “Media Editer” media is playing. Random play [3] Randomly plays the music in the disc or folder. Switches between ON (“Disc Random ON”/ “Folder RDM ON”) and OFF each time this button is pressed. English | 5 Function Control Functions in the table below can be set up by using Function Control. Category Item Setting Entry Setting overview Condition Page MENU “Security Set” 1 sec. Sets security code. 13 “SRC Select” “1”*/ “2” Sets the source selection method. 23 “iPod Mode” “OFF”/ “ON”* When set to “ON”, allows you to select music in the manner similar to that of the iPod. 10 “Beep” “OFF”/ “ON”* Setting the operation check sound (beep sound) ON/OFF. “Clock Adjust” 1 sec. Sets the clock. 13 “Date Adjust” 1 sec. Sets the date. 14 “Date Mode” 7 types 1 sec. Sets the date display mode. “DSI” “OFF”/ “ON”* Turns on/off the Disabled System indicator. “Display” “OFF”/ “ON”* Turns off the display when no operation is performed. — 23 “Dimmer” “OFF”/ “ON”* Dims the display part in conjunction with the light switch of the vehicle. “ILM Dimmer” “OFF”/ “AUTO”* Dims the key Illumination in conjunction with the light switch of the vehicle. 23 “ILM Effect” “OFF”/ “ON”* Sets whether the key illumination brightness is changed in conjunction with the key operation. “AMP” “OFF”/ “ON”* Turns on/off the built-in amplifier. 23 “Zone2” “Rear”*/ “Front” Specifies the destination of AUX input sound when the Dual Zone function is turned on. 23 “Supreme” “OFF”/ “ON”* Turns ON/OFF the Supreme function. 23 “AMP Control” 1 sec. Controls the connected LX amplifier. — 14 “CRSC” “OFF”/ “ON”* Switches to Monaural to decrease noise when reception is poor. “Name Set” 1 sec. Sets the station name (SNPS)/ disc name (DNPS)/ AUX name. 9, 10 “Chinese” “OFF”*/ “ON” Selects Chinese as the display language. 23 “Scroll” “Auto”*/ “Manual” Specifies whether the text is scrolled automatically. — “Built in AUX” “OFF”*/ “ON” Sets whether to display AUX during source selection. “CD Read” “1”*/ “2” Sets the CD read mode. 23 “Audio Preset” 1 sec. Presets the setting value of the audio control. The preset value is retained after resetting. 18 “DEMO Mode” “OFF”/ “ON”* 2 sec. Specifies whether to enable demonstration. — 14 DISP > TYPE A/ B/ C/ D/ E Sets the display pattern. — 8 > MODE 1/ 2 Sets the text display pattern. .C> GRAPH Movie 1 – 2/ Wallpaper 1 – 6/ Wallpaper scan Sets the Type A graphic display. When Wallpaper scan is selected, displays “SCAN”. A> SIDE Text icon/ Source icon Sets the Type C side icon display. C> TEXT Sets the text display. A.CI8 > COLOR*1 Sets the text display color. A.C9 > STATUS “ON”/ “OFF” When set to “ON”, displays the function information for Type A. AP.MEM Presets a station. 12 SCAN...

Descargar ahora

Introduzca dos números de la imagen: