Votos - 3, Puntuación media: 3.7
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
The supplied items may vary. EnglishButton functions Button Function Talk Press and hold to turn the headset on. • Press and hold for 3 seconds to turn the headset off. • With the headset turned off, press and hold for 3 seconds • to enter Pairing mode. Press to answer or end a call. • Press to redial the latest number. • Press and hold to reject an incoming call. • Press and hold to place a call on hold. • Volume Press to adjust the volume. • Press and hold to turn the microphone on or off during a • call. Press and hold both Volume buttons simultaneously to • turn the indicator light on or off. Voice I•n Pairing mode, press and hold to select a language. In Standby mode, press to activate the Voice command. • EnglishButton functions Button Function Talk Press and hold to turn the headset on. • Press and hold for 3 seconds to turn the headset off. • With the headset turned off, press and hold for 3 seconds • to enter Pairing mode. Press to answer or end a call. • Press to redial the latest number. • Press and hold to reject an incoming call. • Press and hold to place a call on hold. • Volume Press to adjust the volume. • Press and hold to turn the microphone on or off during a • call. Press and hold both Volume buttons simultaneously to • turn the indicator light on or off. Voice I•n Pairing mode, press and hold to select a language. In Standby mode, press to activate the Voice command. • 5 Charging the headset Charging the headset This headset has a rechargeable internal battery which is non-removable. Make sure the headset is fully charged before using it for the first time. Use only Samsung-approved chargers. Unauthorised or Non-Samsung chargers could cause damage to the headset or in extreme circumstances an explosion, it could also invalidate any warranty on the product. Charging the headset with the travel adapter 1 Connect the travel adapter to the charging socket on the headset. 2 Plug the travel adapter in to the wall outlet. During charging, the indicator light will turn red. If charging does not begin, unplug the travel adapter and plug it in again. 3 When the headset is fully charged, the red indicator light changes to blue. Unplug the travel adapter from the wall outlet and the headset. English English Charging the headset with the portable charger 1 To charge the portable charger connect the travel adapter as shown below. When the portable charger is fully charged the indicator light will change to Blue. 2 To open the portable charger follow the directions below. 7 3 Insert the headset into the portable charger and switch the portable charger on. 4 Once fully charged the indicator light on the headset will change from Red to Blue, at this point switch the portable charger off. Onoff • Your portable charger will discharge if you fail to switch it off once the headset has finished charging. • With the headset in the portable charger and a mains charger attached, the headset will be charged first followed by the portable charger. • With the headset placed in the portable charger you should only connect a mains charger to the portable charger and never directly to the headset. To just charge the headset please remove it from the portable charger first. • Repeatedly charging and discharging of the headset, over time will cause the battery performance to diminish. This is normal for all rechargeable batteries. • Never make or receive calls while charging, always disconnect your headset from the charger and answer the call. • To save energy, unplug the travel adapter when not in use. The travel adapter does not have a power switch, so you must unplug it from the outlet when not in use to avoid wasting power. The travel adapter should remain close to the socket when in use. Checking the battery level To check the battery level, press and hold the Volume down button and the Talk button at the same time. Depending on the battery level, the indicator light flashes 5 times in one of the following colours: Battery level Indicator light colour Above 80% Blue 80 ~20% Violet Below 20% Red When the headset battery is low The headset indicator light flashes red and you can hear beeps. If the headset powers off during a call, the call will be automatically transferred to the phone. 9 English Wearing the headset Wearing the headset Depending on which ear you are going to wear the headset, simply adjust the ear hook accordingly. . Right Left . You can also use the optional ear rubbers instead of the ear hook. Remove the earpiece cover and attach the ear rubber. Then, rotate the ear rubber left or right slightly depending on which ear you are going to wear the headset. Using your headset This section explains how to turn the headset on or off, pair and connect the headset to the phone, and use various functions. • Activated functions and features may differ depending on the phone type. • Some devices, especially those that are not tested or approved by the Bluetooth Special Interest Group (SIG), may be incompatibl...