Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Safety precautions
Caution for AC Mains Lead
Placement
Set the unit up on an even surface away from direct sunlight, high
For your safety, please read the following text carefully.
temperatures, high humidity, and excessive vibration. These conditions can
This appliance is supplied with a moulded three pin mains plug for your safety and
life.
convenience.
Do not place heavy items on the unit.
tted in this plug.
Should the fuse need to be replaced please ensure that the replacement
Voltage
Check for the ASTA mark
or the BSI mark
on the body of the fuse.
Do not use high voltage power sources. This can overload the unit and cause
If the plug contains a removable fuse cover you must ensure that it is refi tted
a fi re.
when the fuse is replaced.
Do not use a DC power source. Check the source carefully when setting the
unit up on a ship or other place where DC is used.
If you lose the fuse cover the plug must not be used until a replacement cover is
obtained.
AC mains lead protection
A replacement fuse cover can be purchased from your local dealer.
Ensure the AC mains lead is connected correctly and not damaged. Poor
CAUTION!
connection and lead damage can cause fir
re or electric shock. Do not pull, bend,
or place heavy items on the lead.
Grasp the plug fir
rmly when unplugging the lead. Pulling the AC mains lead can
cause electric shock.
Do not handle the plug with wet hands. This can cause electric shock.
Foreign matter
If a new plug is to be fi tted please observe the wiring code as stated below. If in any
doubt please consult a qualifi ed electrician.
Do not let metal objects fall inside the unit. This can cause electric shock or
malfunction.
IMPORTANT
Do not let liquids get into the unit. This can cause electric shock or malfunction.
If this occurs, immediately disconnect the unit from the power supply and contact
your dealer.
As these colours may not correspond with the coloured markings identifying the
Do not spray insecticides onto or into the unit. They contain fl ammable gases
which can ignite if sprayed into the unit.
The wire which is coloured Blue must be connected to the terminal which is marked
Service
The wire which is coloured Brown must be connected to the terminal which is marked
Do not attempt to repair this unit by yourself. If sound is interrupted, indicators
fail to light, smoke appears, or any other problem that is not covered in these
WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH
instructions occurs, disconnect the AC mains lead and contact your dealer or an
OR COLOURED
authorized service center. Electric shock or damage to the unit can occur if the
unit is repaired, disassembled or reconstructed by unqualifi ed persons.
Extend operating life by disconnecting the unit from the power source if it is
not to be used for a long time.
(Back of product)
How to replace the fuse
The location of the fuse differ according to the type of AC mains plug (fi gures A and B).
Confi rm the AC mains plug fi tted and follow the instructions below.
CLASS 1
Illustrations may differ from actual AC mains plug.
LASER PRODUCT
Figure A
Figure B
Fuse cover
For the United Kingdom and Republic of Ireland
Sales and Support Information
Customer Care Centre
08705 357357
Figure A
Figure B
01 289 8333
Fuse
Fuse
(5 ampere)
customer.care@panasonic.co.uk
(5 ampere)
Direct Sales at Panasonic UK
-If you see this symbol-
and confi dence by phoning our Customer Care Centre Monday -
Information on Disposal for Users of Waste Electrical & Electronic
Equipment (private households)
public holidays).
This symbol on the products and/or accompanying documents means that
www.panasonic.co.uk.
used electrical and electronic products should not be mixed with general
household waste.
For proper treatment, recovery and recycling, please take these products
to designated collection points, where they will be accepted on a free
of charge basis. Alternatively, in some countries you may be able to return your
products to your local retailer upon the purchase of an equivalent new product.
Disposing of this product correctly will help to save valuable resources and prevent
of fi nished products, take a browse on our website for further details.
any potential negative effects on human health and the environment which could
otherwise arise from inappropriate waste handling. Please contact your local
authority for further details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with
national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer
or supplier for further information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and
ask for the correct method of disposal.
7
...