Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
5.1 Select country for AUS/NZ CID operation Select AUS or NZ country mode using the switch located inside the battery compartment. Make sure that the answering machine is not connected to the telephone network before opening the battery compartment. When set to NZ position, the AM880 will insert 0/00 when using dial back feature from the CID log in accordance with Telecom NZ requirements. 5.2 Receiving calls During an incoming call, NEW appears and the New Call LED blinks while the phone is ringing. The number of new and total calls appear. The New Call LED blinks until all the new calls have been reviewed. • If only the caller’s phone number is received, the caller’s phone number with the call time and date appear. • If an incorrect, invalid or incomplete signal is received, ‘LINE ERROR’ appears. • If the name and number are unlisted, ‘PRIVATE’ appears with the call time and date. • If the name and number are not available,‘UNAVAILABLE’ appears with the call time and date. If no key is pressed within several seconds, the LCD will return to standby mode, and display the total call counter, new call counter, current time and date. 5.3 Reviewing caller ID records Each Caller ID record includes the time and date of the call, the call number (determined by the order in which the calls are received), the caller’s telephone number, and the caller’s name (if available). 1. Press REVIEW button to review the latest number, or press REVIEW button to review the oldest number. After you view all the calls in memory, ‘END OF LIST’ appears and the New Call LED turns off. 2. To view them again, press REVIEW or button. Note: REPEAT appears if you receive more than one call from the same number. 5.4 Deleting caller ID records Note: You must review all new calls before you can erase all calls. Deleting a single record 1. Press REVIEW or button until you see the record you want to delete. 2. Press ERASE button once. ‘ERASE?’ appears. 3. Hold down the ERASE button until ‘ERASED’ appears.The remaining Caller ID records are renumbered automatically. Deleting all records 1. After reviewing all new messages, press and hold ERASE button until ‘ERASE ALL?’ appears. 2. Hold down the ERASE button until ‘ALL ERASED’ appears. 8 5.5 Backlit display When you receive a call or press any key, the LCD will light up. It will turn off after 10 seconds when no key is pressed. 5.6 Call back from the caller ID memory 1. Press REVIEW or button to find the Caller ID memory location to be redialed. 2. Press CALL BACK button once to redial, the LCD shows ‘DIALING ...’ and the phone number to be dialed immediately. The LCD then shows ‘PICK UP HANDSET’. Note: If you pick up the handset before pressing the CALL BACK button, ‘REPLACE HANDSET’ will appear. Replace the handset than the number will be redialed and ‘PICK UP HANDSET’ will appear. 3. Pick up the handset on the telephone (not supplied) connected to the same telephone line as the AM880 and carry on your call as normal. 6 Remote operation While you are away from your home or office, you can access your AM880 at any time and check your messages. 1. Dial your phone number. 2. When your outgoing message is playing, enter your remote operation security code (the security code label is located on the bottom of the AM880). 3. Two beeps will confirm that the right code has been entered. Now select one of the remote commands. If no key is pressed for approx. 10 seconds, the AM880 will hang up. Press: To: 1# Playback new messages 2# Playback all recorded messages When you press 1# to playback new messages, or 2# to play all messages, you can then press the following keys to get these remote functions. 3# Delete current message and delete all message after playback 4# Repeat previous messages 5# Stop playback 6# Skip current message 9 4. After all your messages have been played, you hear two short beeps. You have 10 seconds to access the menu again, otherwise, the AM880 disconnects automatically. Press: To: 7# Remote Turn on/off the AM880 If you forget to turn your AM880 on, you can phone in from a remote location to turn it on. 1. Call your telephone number. 2. The AM880 answers after 10 rings. After the beep, enter your 3-digit security Code. 3. After the second beep, press 7# then hang up. Subsequent messages will be recorded 8# Re-record an OGM 1. When you hear a beep, begin recording your new OGM (up to 5 minutes). 2. When you have finished recording your new OGM, press 5#. The new OGM will playback to you. 3. Hang up the telephone. 9# Remote Record Memo If you press 9# (to record memo): 1. When you hear a beep, begin recording your memo. 2. When you have finished recording your memo message, press 5#. (press 5# to stop recording) 0# Remote Room monitoring If you press 0# (to room monitoring): 1. The built-in microphone of your answering machine will be switched on and you can then listen in on the room. 2. Every 30 seconds you will hear a beep. If you want to continue listening, press 0# again within...
Otros modelos de este manual:Respuestas Automáticas - AM880 (108.4 kb)