Votos - 2, Puntuación media: 4
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
. Also read the Safety Precautions in the User's Guide. Observe the warnings and cautions to avoid personal injury or damage to the machine. IMPORTANT • Do not connect the USB cable until after the software is installed. • A printer cable is not included. You must purchase a USB cable (less than 10 ft. / 3 m) to connect your machine to a computer. 1 Connect the telephone line and the power cord. • If you connect the telephone line, see “Examples of Connecting the Machine” on page 36. UK users only If the connector of the external device cannot be connected to the jack on the machine, you will need to purchase a B.T. adapter to connect as follows: Connect the external device line to the B.T. adapter, then connect the B.T. adapter to the jack. 2 Turn on the machine. • The language setting is only available for some countries. • If you have an undesired language or country selection, refer to the User’s Guide. 3 Install the Print Head. • If the Scanning Unit (Printer Cover) is left open for more than 10 minutes, the Print Head Holder moves to the right. Close and reopen the Scanning Unit (Printer Cover) to return the Holder to the center. • There might be some transparent or light blue ink on the inside of the bag the print head comes in - this has no effect on print quality. Be careful not to get ink on yourself when handling these items. • Do not reattach the protective cap once you have removed it. 4 Install the ink tanks. • Ensure that all the ink tanks are installed in the order directed by the label. The machine cannot be used unless all the ink tanks are installed. • For safety reasons, store ink tanks out of the reach of small children. • Do not drop or shake ink tanks as this may cause the ink to leak out and stain your clothes and hands. • Be sure to remove the clear film from the ink tank in the exact order as shown in step 3. • Do not reattach the protective cap once you have removed it. • The Alarm Lamp still lights orange if an ink tank is not installed properly. Open the Scanning Unit (Printer Cover) and make sure that all the ink tanks are installed in the correct order directed on the label. 2 ENGLISH ENGLISH 5 Align the Print Head from the Operation Panel. Execute automatic Print Head alignment to keep high print quality. • When executing automatic Print Head alignment, always load paper in the Auto Sheet Feeder. You can load paper in both the Auto Sheet Feeder and Cassette when printing. For details, refer to the User's Guide. • If the automatic Print Head alignment screen is not displayed, see “Aligning the Print Head Automatically” on page 49. • When the Print Head position pattern is printed, Print Head alignment is complete. For fax users Select the receive mode according to your needs. See “Receive Modes” on page 44. • If you want to receive only faxes automatically with your machine, or you have a dedicated telephone line for fax use only: