Votos - , Puntuación media: ( )

Manual de usuario Canon, modelo PIXMA MP830

Fabricar: Canon
Tamaño del archivo: 1.84 mb
Nombre del archivo: c45db0df-29c3-4578-9919-4c269af61529.pdf

Idioma del manual:

El documento se está cargando, por favor, espere

Descargar ahoraCerca

El documento se está cargando, por favor, espere

Descargar ahoraCerca

. Also read the Safety Precautions in the User's Guide. Observe the warnings and cautions to avoid personal injury or damage to the machine. IMPORTANT • Do not connect the USB cable until after the software is installed. • A printer cable is not included. You must purchase a USB cable (less than 10 ft. / 3 m) to connect your machine to a computer. 1 Connect the telephone line and the power cord. • If you connect the telephone line, see “Examples of Connecting the Machine” on page 36. UK users only If the connector of the external device cannot be connected to the jack on the machine, you will need to purchase a B.T. adapter to connect as follows: Connect the external device line to the B.T. adapter, then connect the B.T. adapter to the jack. 2 Turn on the machine. • The language setting is only available for some countries. • If you have an undesired language or country selection, refer to the User’s Guide. 3 Install the Print Head. • If the Scanning Unit (Printer Cover) is left open for more than 10 minutes, the Print Head Holder moves to the right. Close and reopen the Scanning Unit (Printer Cover) to return the Holder to the center. • There might be some transparent or light blue ink on the inside of the bag the print head comes in - this has no effect on print quality. Be careful not to get ink on yourself when handling these items. • Do not reattach the protective cap once you have removed it. 4 Install the ink tanks. • Ensure that all the ink tanks are installed in the order directed by the label. The machine cannot be used unless all the ink tanks are installed. • For safety reasons, store ink tanks out of the reach of small children. • Do not drop or shake ink tanks as this may cause the ink to leak out and stain your clothes and hands. • Be sure to remove the clear film from the ink tank in the exact order as shown in step 3. • Do not reattach the protective cap once you have removed it. • The Alarm Lamp still lights orange if an ink tank is not installed properly. Open the Scanning Unit (Printer Cover) and make sure that all the ink tanks are installed in the correct order directed on the label. 2 ENGLISH ENGLISH 5 Align the Print Head from the Operation Panel. Execute automatic Print Head alignment to keep high print quality. • When executing automatic Print Head alignment, always load paper in the Auto Sheet Feeder. You can load paper in both the Auto Sheet Feeder and Cassette when printing. For details, refer to the User's Guide. • If the automatic Print Head alignment screen is not displayed, see “Aligning the Print Head Automatically” on page 49. • When the Print Head position pattern is printed, Print Head alignment is complete. For fax users Select the receive mode according to your needs. See “Receive Modes” on page 44. • If you want to receive only faxes automatically with your machine, or you have a dedicated telephone line for fax use only: • If you receive mainly voice calls and sometimes faxes, or you want to receive faxes manually: • If you want to receive voice messages on your answering machine and receive faxes automatically: • If you want to receive faxes automatically as well as voice calls: • If you have subscribed to a Distinctive Ring Pattern Detection (DRPD) service with your telephone company (US and Canada only): • If you want your machine to automatically switch between fax and voice calls by the call ring patterns (Network Switch): • To send a fax, you need to set the telephone line type setting properly on the machine. For details on how to confirm and change this setting, refer to the User's Guide. If you are unsure of your telephone line type, contact your telephone company. 3 ENGLISHENGLISH For information about the software installation on this page, also refer to the Easy Setup Instructions. Install the software Select Easy Install in order to install the application software, On-screen Manual and MP drivers. Select Custom Install in order to choose the options you would like to install. IMPORTANT • Temporarily close any open applications, including anti-virus software. Computer security programs can be re-started after software installation. Installing the MP Driver - Windows® • If you have an earlier version of the MultiPASS Suite software installed on your computer, uninstall this version before installing the new version. For instructions on uninstallation, refer to the guides for that version of MultiPASS Suite. • You must log on as an administrator or have administrative privileges in order to install the software in Windows XP or Windows 2000. • Do not switch users during the installation process. • If the following screen appears, the USB cable is connected. Perform the following steps. 1. Press [ON/OFF] to turn off the machine. 2. Disconnect the USB cable. 3. Click [Cancel]. Installing the MP Driver - Macintosh® • Do not connect the machine to Mac® OS 9 or Mac OS X...