Votos - 1, Puntuación media: 5
(
)
)
|
Resumen del manual
(1816 x 1060 x 559mm) INSTALLED SIZE 71-1/2 x 41-3/4 x 22 In. WEIGHT 115 Lbs. (52 Kg.) (1816 x 1060 x 559mm) WEIGHT w/WATER 690 Lbs. (313 Kg.) WEIGHT 115 Lbs. (52 Kg.) GAL. TO OVERFLOW 69 Gal. (261 L) WHIRLPOOL MIN. OPERATING VOL. 60 Gal. (227 L) WEIGHT w/WATER 690 Lbs. (313 Kg.) BATHING WELL AT SUMP 41 x 21-1/2 In. (1041 x 546mm) BATHING WELL AT SUMP 41 x 21-1/2 In. (1041 x 546mm) BATHING WELL AT RIM 62 x 31-1/2 In. (1574 x 800mm) BATHING WELL AT RIM 62 x 31-1/2 In. (1574 x 800mm) WATER DEPTH TO OVERFLOW 14-1/4 In. (362mm) WATER DEPTH TO OVERFLOW 14-1/4 In. (362mm) FLOOR LOADING 33 Lbs./Sq.Ft. (163 Kgs./Sq.m) FLOOR LOADING 33 Lbs./Sq.Ft. (163 Kgs./Sq.m) (PROJECTED AREA) (PROJECTED AREA) PTS. CUBE (FT3) WHIRLPOOL ELECTRICAL SPECIFICATIONS 27.8 55.7 PTS. CUBE (FT3) 27.8 55.7 WHIRLPOOL PUMP 2.1 HP, 14.4 AMPS ,120V. NOTES: BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA TYPE INSTALLATION. SUMP OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIALS BY OTHERS. . IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING SYSTEM PIPING AND DRAIN OVERFLOW. MOUNTING HOLES DRILLED BY INSTALLER. ¦ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION. FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 / CSA Certified. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet. H22 © 2008 AS America Inc. Rev. 2/08 ...
Otros modelos de este manual:Piscinas - Town Square Whirlpool and Bathing Pool 2742.002 (177.92 kb)
Piscinas - Town Square Whirlpool and Bathing Pool 2742.018WC (177.92 kb)