Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
•This electric chain saw is designed for use with a 120V AC power supply. Always pull out the plug before fitting any parts or adjusting the saw. •Do not start sawing until a sufficient amount of chain oil has reached the chain. Index Safety Precautions......................................................4-6 General safety................................................................ 7 Introduction............................................................... 8-10 User Explanation..........................................................11 Technical specification................................................. 11 Mounting guide bar and chain......................................12 Chain oil....................................................................... 12 Before each use........................................................... 13 Start and stop...............................................................13 Chain brake..................................................................14 Testing and maintenance of the chain brake............... 15 Maintenance.................................................................16 Cutting equipment........................................................17 Chain maintenance................................................. 18-19 General working instruction.................................... 20-25 Basic working techniques........................................26-35 Safety symbols The following safety symbols are found throughout this manual and are designed to make you aware of potential hazards or unsafe practices. WARNING! WARNING - Hazards or unsafe practices which could result in severe personal injury or death. STOP CAUTION! CAUTION - Hazards or unsafe practices which could result in minor personal injury. IMPORTANT! IMPORTANT - Hazards or unsafe practices which could result in product or property damage. WARNING! When using a chain saw, basic safety precaution should always be followed to reduce the risk of fire, electric shock and personal injury. STOP 1 ENGLISHENGLISH Explanation of Symbols 400MAX . 25° Max 9 T Oregon 91VG MAX 16" • hard hat • hearing protection • face protector or goggles • Bar length: MAX16 inches • Max. nose radius: 9 teeth • Chain type: Oregon 91VG WARNING! An electric chain saw can be dangerous! Careless or improper use can cause serious or even fatal injury. Read All Instuctions Read and understand the Operator's Manual before using the electric chainsaw. Always wear: Do not expose to rain or damp. Unplug immediately if cable is damaged. Maximum permissible bar length. WARNING! Do not let guide bar tip come into contact with any object. Tip contact may cause kickback and serious injury. Always use both hands when operating an electric chain saw. Measured maximum kickback value without triggering brake, for the bar and chain combination on the label. Recommended cutting equipment in this example: WARNING! When using an electric chain saw, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following. 2 Safety Precautions Safety precautions for electric chain saw users Kickback safety precautions STOP WARNING! KICKBACK may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut. • Tip contact can, in some cases, cause a lightning fast reverse REACTION, kicking the guide bar up and back towards the operator. • Pinching the chain along the top of the guide bar may push the guide bar rapidly back towards the operator. • Either of these reactions may cause the operator to lose control of the saw, resulting in serious personal injury. Do not rely exclusively on the safety devices built into your saw. As a user of an electric chain saw, you should take a few steps to keep your cutting jobs free from accident or injury. 1. With a basic understanding of kickback, you can reduce or eliminate the element of surprise. Sudden surprise contributes to accidents. 2. Keep a good firm grip on the saw with both hands, the right hand on the rear handle and the left hand on the front handle, as long as motor is running. Use a firm grip with thumbs and fingers encircling the handles of the electric chain saw. A firm grip will help you reduce kickback and maintain control of the saw. Don’t let go of a running chain saw! 3. Ensure that the area in which you are cutting is free from obstacles. Do not let the tip of the guide bar come in contact with logs, branches, or any other objects while the chain is running. 4. Cut at high motor speed. 5. Do not overreach or cut above shoulder height. 6. Follow chain manufacturer’s sharpening and maintenance instructions. 7. Use only replacement bars and chains specified by the manufacturer, or the equivalent. Kickback safety features 1. Reduced-Kickback Guide Bar, designed with a small radius tip which reduces the size of the kickback zone. A Reduced Kickback G...