CDA-7876 Only NOTE If you press the g DN button the display scrolls in reverse sequence. 6-EN 3 Press the TUNE button to toggle mode between SUB-W ON and SUBW OFF. 4 Press the SETUP button after setting the SUB-W ON. 5 Press the MODE button repeatedly to select the SUB-W mode. > SUB-W > BALANCE VOLUME < FADER < Press the g DN or f UP button after selecting the SUB-W mode, and the subwoofer output phase is toggled SUBW NOR (0°) or SUBW REV (180°). 6 Rotate Audio Control knob until the desired sound is obtained in each mode. Sound (Beep) Guide Function This function will give audible feedback with varying tones depending upon the button pressed. 1 Press and hold the SETUP button for at least 3 seconds. 2 Press the f UP button repeatedly to select “BEEP.” Each press of the f UP button changes the modes as shown: NOTE If you press the g DN button the display scrolls in reverse sequence. > NORMAL/HI-FI > AMBER* > DIM > SUB DEMO < AUX < SCR < MUTE NORMAL/HI-FI > AMBER* > DIM > SUB DEMO < AUX < SCR < MUTE NORMAL/HI-FI > AMBER* > DIM > SUB DEMO < AUX < SCR < MUTE NORMAL/HI-FI > AMBER.> DIM > SUB > BEEP > MUTE DEMO < AUX (AUX Mode Display Setting..) < SCR < . CDA-7876 Only .. Displayed after AUX IN ON is set. 3 Press the TUNE button to toggle the mode between AUX ON and AUX OFF. NOTES • The initial setting at the factory is AUX OFF. • You can set the AUX mode display by pressing the g DN or f UP button after AUX ON is set, select the AUX mode display setting, and then press the TUNE button. • When connecting the KCA-410C, you can set two AUX mode displays. 4 Press the SETUP button to return to normal mode. CENTER f X-OVER SETUP 5 To adjust the volume, etc., first press the SOURCE button and select the AUX mode, then make the necessary adjustment. NOTE When using the Versatile Link Terminal (KCA-410C), you can connect two external inputs. To select the mode, press the BAND button on the unit. Demonstration This unit has a Demonstration feature which simulates the display functions. 1 Press and hold the SETUP button for at least 3 seconds. 2 Press the f UP button to select the DEMO mode. Each press changes the modes as shown: > NORMAL/HI-FI > AMBER* > DIM > SUB DEMO < AUX < SCR < MUTE Otros modelos de este manual: reproductores de CD - CDA-7977 (610.43 kb) reproductores de CD - CDA-7876 (610.43 kb) reproductores de CD - cda-7873 (610.43 kb)
)
