Votos - 1, Puntuación media: 5
(
)
)
|
Resumen del manual
Be specially careful not to use contact cleaners containing oil, for they may deform the plastic component. Condensation (of dew) may occur inside the unit when there is a great difference in temperature between this unit and the outside. This unit may not function properly if condensation occurs. In this case, leave the unit for a few hours with the power left ON, and restart the operation after the condensation has dride up. Be specially cautious against condensation in a following circumsatance: When this unit is carried from a place to another across a large difference in temperature, when the humidity in the room where this unit is installed increases, etc. In case of difficulty What appears to be a malfunction may not always be serious. If your unit should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or service representative. Operation to reset The microcomputer may malfunction (impossibility to operate, erroneous display, etc.) when the connection cords are un- plugged while the unit is ON or due to an external factor. In this case, execute the following method to reset the microcomputer and return it to normal condition. Unplug the power cord from the power socket and plug the power cord into the socket again. CD player unit Symptom Cause Remedy The unit is not turned ON with the ON/ OPower plug is loosely connected. OInsert the power plug firmly to the AC outlet. STANDBY (POWER/ ) switch ON. OWith the power plug connected to the switched AC outlet of an amplifier, the power of the amplifier is turned off. OTurn the amplifier’s power ON. Sound is not heard with the 6 key on. ODisc is loose. ODisc is too dirty. ODisc is cracked. OCondensation has occurred on the optical lens unit. OThe connection cords are inserted loosely. OOutput level is attenuated too low. OInsert disc properly. OWipe off the dust on the surface of the disc referring to “Disc handling precautions”.. OReplace the disc with a new one. ORemove any condensation from the unit by referring to the section entitled, “Caution on condensation”. . OConnect all connection cords firmly. OAdjust the output level with OUTPUT key on the remote control unit. 5 Music is interrupted. (Sound is skipped.) ODisc is too dirty. ODisc is cracked. OOscillation is applied to this unit. OWipe off the dust on the disc surface referring to “Disc handling precautions”. . OReplace the disc with a new one. OTry selecting a place where no strong vibrations occur by changing the installation place, etc. Play begins as soon as the unit is turned ON. OThis unit is designed so that play begins automatically when the unit is turned ON if a disc is already loaded. OIf automatic play is not required remove the disc from the player before setting the unit to STANDBY mode. Remote control unit Symptom Cause Remedy Remote control operation is not possible. OBatteries are exhausted. OThe remote control unit is too far away from the main system, controlling angle is too large, or there is an obstacle in between. OReplace with new batteries. 8 OOperate the remote control unit within the controllable range. 8 Specifications DPF-R6030 / CD-406 [ Format ] System .......................... Compact disc digital audio system Laser ...................................................... Semiconductor laser [ D/A Convertors ] D/A Conversion ........................................... 1 Bit (D.R.I.V.E.) Oversampling ................................................. 8 fs (352.8 kHz) [ Audio ] Frequency response .......................... 4 Hz – 20 kHz, ±0.5 dB Signal to noise ratio ................................. More than 105 dB Dynamic range ............................................ More than 95 dB Total harmonic distortion + noise .............................................. Less than 0.005% (at 1 kHz) Wow & flutter .......................................Unmeasurable Limit Output level/impedance Variable .................................................. (Max.) 2 V/1 kW Digital output Coaxial .................................................... 0.5 V p-p / 75 W Optical ........................................... –15 dBm – –21 dBm (Wave length 660 nm) Headphone output ............................. (Max.) 20 mW (32 W ) [ Laser ] Wave length ............................................... 760 nm – 800 nm Laser power class ...............................................Class 1 (IEC) [ General ] Power consumption ....................................................... 14 W Dimensions ........................................ W : 440 mm (17-5/16") H : 124.5 mm (4-15/16") D : 398 mm(15-5/8") Weight (Net) .................................................... 5.1 kg (11.2 lb) DPF-R4030/3030 / CD-404/403 [ Format ] System .......................... Compact disc digital audio system Laser ...................................................... Semiconductor laser [ D/A Convertors ] D/A Conversion ..................
Otros modelos de este manual:reproductores de CD - CD-403 (695.39 kb)
reproductores de CD - CD-404 (695.39 kb)
reproductores de CD - DPF-R3030 (695.39 kb)
reproductores de CD - DPF-R4030 (695.39 kb)