Votos - 5, Puntuación media: 3.2 ( )

Fabricar: Kenwood Tamaño del archivo: 695.39 kb Nombre del archivo: Idioma del manual:

2 Select the disc. 3 Select the new track No. 4 Set the entry. Main unit Remote control unit CHECK DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 1 2 3 4 5 6 7 8 9 0 +10 P.MODE CD-406/DPF-R6030 Blinks. CD-404/403/DPF-R4030/R3030 Light up TRACK NO. DISC P.C.P.C. 1 SINGLE NO. OPerform only step 1 to simply check the program. OEach time the key is pressed, the program No. and the track No. on CD are displayed. Example OPress it while the “PGM 01” indicator blinks. (CD-406/DPF-R6030 only) OPress the key while the “P.C.” indicator is lit. (CD-404/403/DPF-R4030/ R3030 only) OThe track being played cannot be changed. To add a track to the program OWhen a track No. is selected, the track will be added to the end of the existing program. 1 Select the disc. 2 Select the desired track No. 3 Press the P.MODE key. DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 1 2 3 4 5 6 7 8 9 0 +10 P.MODE REMOTE CONTROL UNIT RC-P0601 POWER 1 2 DOWN UP 3 4 5 6 7 8 9 P.MODE 0 +10 TIME DISP. CLEAR CHECK SKIP REPEAT RANDOM EDIT DISC SELECTOR OUTPUT 5 4 3 1 2 Programmed play (PGM mode) To clear tracks from the program OEach time the key is pressed, the last track in the program is cleared. OThe tracks which are programmed earlier than the track being played cannot be cleared. OSelected tracks can be also completely cleared just by operating the OPEN/CLOSE (0) key. OThe entire program is cleared. Press to clear tracks from the end. To clear all tracks CLEAR P.MODE Auto space functionDuring programming of tracks, a non-recorded space of a few seconds will be automatically created between tracks. By recordO Even when the performances of two tracks are continuous (which ing tracks with these spaces on tape, the search and repeat play occurs with classical or live recording music), the spaces will be operations of tape using the DPSS function (which works by created if they have different track Nos. searching the non-recorded spaces) can be performed reliably. Playback in a random order (Random playback) As tracks are selected at random, you can enjoy listening to for a long time. OLoad a disc in the CD player.Preparation 1 1 Check that the unit is in the TRACK mode.! 2 2 Press the RANDOM key. CD-406/DPF-R6030 RANDOM The number here changes. In case track No. 5 is selected CD-404/403/DPF-R4030/R3030 Blinks 54321 DISC FILE RANDOM 109876 54321 2019181716 1514131211 TRACK NO. 54321 DISC FILE RANDOM SINGLE 5 TRACK NO. SINGLE NO. NO. OEach time a track ends, the same operation as above is repeated, and the track selected next is played. ORandom play stops after all of the tunes have been played once. OThe random playback can also be repeated by pressing the REPEAT key. To select another track in the middle of play-To cancel random playback ing one RANDOM OPress the RANDOM key to start normal playback. Repeated playback Preparation OLoad a disc in the CD player. To repeat the entire disc This allows repeated playback of all the tracks on the disc loaded in the disc tray. CD-406/DPF-R6030 CD-404/403/DPF-R4030/R3030 PGM indicator goes off. 54321 CD-406/DPF-R6030 CD-404/403/DPF-R4030/R3030 REPEAT indicator lights up. 1Press so that the “PGM” indicator goes off. 2Press the REPEAT key. For the CD-406/DPF-R6030 The current status is displayed when the key is pressed once. When it is pressed while the status is dis- played, the repeat OFF status can be set to ON (or vice versa). 3Start playback. P.MODE REPEAT 54321 TRACK NO. DISC REPEAT NO. Repeated playback To repeat only the programmed tracks 1Press so that the “PGM” indicator lights. 2Select the disc. 3Select the desired track number. 4Set the entry. 5Repeat steps 2 – 4 above. 6Press the REPEAT key. 7Start playback. Go to step 3 within 8 seconds. Go to step 4 within 8 seconds. For the CD-406/DPF-R6030 The current status is displayed when the key is pressed once. When it is pressed while the status is dis- played, the repeat OFF status can be set to ON (or vice versa). Main unit Remote control unit P.MODE DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 1 2 3 4 5 6 7 8 9 0 +10 P.MODE REPEAT CD-406/DPF-R6030 CD-404/403/DPF-R4030/R3030 PGM indicator lights up. 54321 PGM OAll of the programmed tracks will be repeated. OIn case only one track is programmed, only that track will be repeated. OUp to 32 tracks can be programmed. When “FULL” is displayed, no more tracks can be programmed. CD-406/DPF-R6030 CD-404/403/DPF-R4030/R3030 REPEAT indicator lights up. 54321 TRACK NO. DISC PGM REPEAT NO. To cancel repeated playback CD-406/DPF-R6030 CD-404/403/DPF-R4030/R3030 REPEAT indicator goes off. Press the REPEAT key. REPEAT CD-406/DPF-R6030 Press the REPEAT key. REPEAT (Twice) CD-404/403/DPF-R4030/R3030 54321 TRACK NO. DISC PGM NO. 19 CD-406/DPF-R6030 Blinks. The following procedure allows to record a CD within the specified tape length so that no music is interrupted in the middle at the ends of sides A and B. Editing (Except for CD-403/DPF-R3030) Preparation 1Light the “EDIT” indicator. O Load a disc in the CD player. O Check that the unit is in the TR...

Descargar ahora

Introduzca dos números de la imagen: