Votos - 1, Puntuación media: 3
(
)
)
|
Resumen del manual
Playing the CD ––Normal Play/Shuffle Play/Repeat Play This unit lets you play the CD in different play modes. 1 Press PLAY MODE repeatedly until the mode you want appears. Select To play CONTINUE The CD in the original order. SHUFFLE The tracks on the CD in random order. PROGRAM The tracks on the CD in the order you want them to be played (see “Programming the CD tracks” on page 12). 2 Press H. Tip (CDP-XE570/XE370 only) You can select the playing mode by pressing CONTINUE, SHUFFLE, or PROGRAM on the remote. Repeat Play Operations You can play the CD tracks repeatedly in any play modes. To activate the Repeat Play function, press REPEAT until “REPEAT’ appears in the display. To Press REPEAT Repeat only one track Until “REPEAT 1” appears while playing the track you want to repeat. Cancel Repeat Play Until “REPEAT” or “REPEAT1” disappears. When you are in the Repeat Play function, the player repeats the tracks as follows: When the disc is The player repeats played in Continuous Play All the tracks Shuffle Play All the tracks in random order Programme Play The same programme (page 12) Other Operations To Do this Stop playback Press x. Pause Press X. Press X again or H to resume play. Select a track During play or pause, turn lAMSL clockwise (to go forward) or counterclockwise (to go backward) (or press >( to go forward) or . (to go backward) on the remote (CDP-XE570/XE370 only)). Select a track directly Press the number button on the remote.* Find a point in a track Press and hold M or m during playback, and release at the desired point. Play tracks in random Press PLAY MODE until order “SHUFFLE” appears in the display. Remove the CD Press AOPEN/CLOSE. Adjust the volume Press ANALOG OUT LEVEL +/– on the remote. * When you directly locate a track numbered over 10, press >10 first, then the corresponding number buttons. To enter “0,” use button 10. Example: To play track number 30 Press >10 first, then 3 and 10. Tips • You can adjust the analog output level with the ANALOG OUT LEVEL +/– on the remote (page 7) (CDP-XE570/XE370 only). • You can adjust the headphones volume on the remote. To adjust the volume, connect the headphones to the PHONES jack and adjust the volume with the ANALOG OUT LEVEL +/– on the remote (CDP-XE570 only). • If there is no CD in the player, “–NO DISC–” (or “no dISC” for the CDP-XE370/XE270) appears in the display. Note If “– OVER –” (or “ ” for the CDP-XE370/ XE270) appears in the display, the disc has reached the end while you were pressing M. Press m or turn lAMSL counterclockwise to go back. Getting Started Playing CDs Using the CD display You can check information about the disc using the display. In the stop mode Press TIME/TEXT (or TIME for the CDPXE370/ XE270 ). CDP-XE570 tracks Music calendar Total playing time Total number of 12 3 4 5 67 8 9 10 TRACK INDEX MIN SEC 4528 10 CDP-XE370/XE270 12345 67 8 9 10 MIN SEC 4528 10Music calendarTotal playing timeTotal number oftracks The display shows the total number of tracks, total playing time, and music calendar. While in Shuffle Play mode (“SHUFFLE” appears in the display; see page 9), a one- second access time blank is added between each track. This increase is automatically added to the total playing time in the display. The information also appears when you press AOPEN/CLOSE to close the disc tray. During normal playback While playing a disc, the display shows the current track number, playing time, and the music calendar. The track numbers in the music calendar disappear after they are played. To check the remaining time Press TIME/TEXT (or TIME for the CDPXE370/ XE270) during playback. Each time you press this button while playing a disc, the display changes as shown in the chart below. Playing time on the current track t Remaining time on the current track t Remaining time on the disc Notes • If the track number exceeds 25, “––.––” appears instead of the remaining time on the current track. • When the disc has more than 25 tracks in Shuffle or Programme Play, “––.––” appears instead of the remaining time. While playing a CD TEXT disc (CDP-XE570 only) CD TEXT discs have information, such as the disc titles or artist names, memorised in a blank space on the discs where, on normal discs, there is no information. The display shows the CD TEXT information of the disc so that you can check the current disc title, artist name, and track title. When the player detects CD TEXT discs, the “CD TEXT” indication appears in the display. In the Stop Mode Press TIME/TEXT. Each time you press this button, the display changes as shown in the chart below. Disc title t Artist name t Total number of tracks and total playing time During normal playback Press TIME/TEXT. Each time you press this button, the display changes as shown in the chart below. Track title t Playing time on the current disc t Remaining time on the current track t Remaining time on the disc If a title or name has more than 12 characters, the first 12 characters will light up after...
Otros modelos de este manual:reproductores de CD - CDP-XE370 (197.8 kb)
reproductores de CD - CDP-XE570 (197.8 kb)