Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
While in Shuffle Play mode (“SHUFFLE” appears in the display; see page 9), a one- second access time blank is added between each track. This increase is automatically added to the total playing time in the display. The information also appears when you press AOPEN/CLOSE to close the disc tray. During normal playback While playing a disc, the display shows the current track number, playing time, and the music calendar. The track numbers in the music calendar disappear after they are played. To check the remaining time Press TIME/TEXT (or TIME for the CDPXE370/ XE270) during playback. Each time you press this button while playing a disc, the display changes as shown in the chart below. Playing time on the current track t Remaining time on the current track t Remaining time on the disc Notes • If the track number exceeds 25, “––.––” appears instead of the remaining time on the current track. • When the disc has more than 25 tracks in Shuffle or Programme Play, “––.––” appears instead of the remaining time. While playing a CD TEXT disc (CDP-XE570 only) CD TEXT discs have information, such as the disc titles or artist names, memorised in a blank space on the discs where, on normal discs, there is no information. The display shows the CD TEXT information of the disc so that you can check the current disc title, artist name, and track title. When the player detects CD TEXT discs, the “CD TEXT” indication appears in the display. In the Stop Mode Press TIME/TEXT. Each time you press this button, the display changes as shown in the chart below. Disc title t Artist name t Total number of tracks and total playing time During normal playback Press TIME/TEXT. Each time you press this button, the display changes as shown in the chart below. Track title t Playing time on the current disc t Remaining time on the current track t Remaining time on the disc If a title or name has more than 12 characters, the first 12 characters will light up after the title or name scrolls by in the display. Notes • If the track number exceeds 25, “––.––” appears instead of the remaining time on the current track. • When the disc has more than 25 tracks in Shuffle or Programme Play, “––.––” appears instead of the remaining time. • The display may not show all the characters depending on the disc. • This player can only display the disc titles, track titles and artist names from CD TEXT discs. Other information cannot be displayed. Turning off indications in the display (CDP-XE570/XE370 only) Press DISPLAY ON/OFF on the remote. Each time you press this button while playing a disc, the display turns off and on alternately. Even when the display is turned off, the display turns on if you pause or stop play. When you resume play, the display turns off again. Before you start playing, when you press DISPLAY ON/OFF to turn off the display, “DISPLAY OFF” (or “d–OFF” for the CDPXE370) appears, and when you press the button to turn on the display, “DISPLAY ON” (or “d– ON” for the CDP-XE370) appears. Repeating a Specific Portion (AyB Repeat) (CDP-XE570 only) You can play a specific portion in a track repeatedly. This might be useful when you want to memorise lyrics. Note that you cannot repeat a portion extending to two tracks. 1 While playing a disc, press A y B on the remote when you find the starting point (point A) to be played repeatedly. “A-” of “REPEAT A-” flashes in the display. 2 When you reach the ending point (point B), press A y B again. “REPEAT A-B” appears. The player plays this specific portion repeatedly. To cancel AyB Repeat Press REPEAT. Setting a new starting point When you press A y B during AyB Repeat Play, the ending point B becomes the new starting point (point A). Then press A y B again when you reach the ending point (new ending point B). “REPEAT A-B” appears and the player repeats between the new starting and ending points. Tip When you want to restart from the starting point A, press H during AyB Repeat. Playing CDs Programming the CD tracks You can arrange the order of the tracks on a disc and create your own programme. The programme can contain up to 24 tracks. 1 Press PLAY MODE repeatedly until “PROGRAM” appears in the display before you start playing. 2 Turn lAMSL until the track you want appears and push lAMSL to select the track. The track number that you programmed, the playing order, and the total playing time appear in the display. If you’ve made a mistake Press CLEAR, then repeat Step 2. Tip (CDP-XE570/XE370 only) You can select the track using the number buttons on the remote. To select a track with a number over 10, use >10 (see page 9). 3 Repeat Step 2 to programme the tracks in the order you want. 4 Press H to start Programme Play. To cancel Programme Play Press PLAY MODE. Tips • The programme remains until erased or until you press AOPEN/CLOSE. The programme you have created remains even after the Programme Play mode ends or you select another play mode. • For the recording to the A side or B side of the cassett...
Otros modelos de este manual:reproductores de CD - CDP-XE270 (197.8 kb)
reproductores de CD - CDP-XE570 (197.8 kb)