Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
For example, if you insert the disc with 151 folders, the player reads only 150 folders. • The CD player can play MP3 files in folders nested up to 8 layers deep in the folder tree. Tip To specify a desired playback order, before the folder or file name, input the order by number (e.g., “01”, “02”), then record contents onto a disc. (The order differs depending on the writing software.) Note on playback of MP3 files Depending on the encoding/writing software, recording device, or the recording media used at the time an MP3 file is recorded, you may encounter such problems as disabled playback, sound interruptions, and noise. Playing a disc with MP3 files (DECK A only) This system lets you play discs with MP3 files. DISC 1-5 A(OPEN/CLOSE for RCD-W100) POWER AMS H X x ALBUM PLAY MODE DECK A/DECK B ALBUM +/– 1 Turn on your amplifier and adjust the volume to the minimum. 2 Set your amplifier’s input selector to select this unit. 3 Press POWER. 4 Press OPEN/CLOSE (or one of the DISC 1-5 A buttons for RCD-W500C) and place a disc. Press OPEN/CLOSE (or A) again to close the disc tray. With the label side up 5 Press PLAY MODE repeatedly to select the Continuous play mode. When you The unit plays select ALL DISCS All discs in the unit consecutively in the order of the disc number. 1 DISC Only one disc you have selected. ALBUM* All MP3 files in the selected album on the selected disc. * When a disc that contains no album is played with “ALBUM” selected, the disc is played in the same way as 1 DISC mode. 6 To select an album, press ALBUM until the ALBUM SELECT indicator in the display lights up, then turn AMS until the album you want appears (or press ALBUM +/– on the remote). 7 Press H. The unit starts playing. Adjust the volume on the amplifier. continued Basic Operations Tips • The function of AMS control changes according to the ALBUM SELECT indicator in the display. When the indicator is off, the AMS control selects tracks. When the indicator lights up, the AMS control selects albums. Press ALBUM to turn the ALBUM SELECT indicator on or off. • You can start playing from a specific track in step 7. 1 Turn AMS while the ALBUM SELECT indicator in the display is turned off (or press ./> or the number buttons on the remote) to select the track you want to play (see “Using the Display” on page 13 for details about the displayed information). 2 Press H. • You can remove or load discs while playing the other deck. Press OPEN/CLOSE (or A) of the deck that is not currently playing to open that tray, and remove or load a disc. • The DISC 1-5 button indicator lights orange when the disc is in the tray. The indicator lights to green when the disc is selected (RCD-W500C only). • You can connect a headphone to the PHONES jack on the front panel. Turn the PHONE LEVEL control to adjust the volume. • You can replace any discs in the other disc trays while playing a disc in DECK A of RCD-W500C. Press A of the deck that is not currently playing to open that tray, and remove or load a disc (Ex- Change function). Notes • You can play unfinalized CD-Rs or CD-RWs only in DECK B. For the detailed explanation about finalizing, see “Finalizing a CD-R or CD-RW” on page 29. • Be sure to close the disc trays when the unit is not in use to prevent dust and dirt from entering and prevent damage to the disc tray. • When you turn on the unit, you will hear some mechanical noise from the unit. This is not a malfunction. • You may not be able to play certain MP3 files. • “0:00” appears when skipping a portion of ID3 ver.2 tag. The skipping time depends on the size of the ID3 ver.2 tag. To Stop playback Pause playing Select the disc (for DECK A of RCD-W500C) Go to the next disc (for DECK A of RCD-W500C) Z Go to the next track Go to the beginning of the current track or the preceding track Go to the next album Go back to the preceding album Remove the disc * AMS: Automatic Music Sensor Do the following: Press x. Press X. Press the button again or press H to resume playing. Press one of the DISC 1-5 buttons. Press DISC SKIP on the remote. Turn AMS* clockwise while the ALBUM SELECT indicator in the display is turned off (or press > on the remote ). Turn AMS counterclockwise while the ALBUM SELECT indicator in the display is turned off (or press . on the remote). Turn AMS clockwise while the ALBUM SELECT indicator in the display is turned on (or press ALBUM + on the remote). Turn AMS counterclockwise while the ALBUM SELECT indicator in the display is turned on (or press ALBUM – on the remote). Press OPEN/CLOSE (or A), whichever contains the disc you want to remove after stopping play. Using the Display You can check information about the disc using the front panel display. When using the remote, set DECK A/DECK B to DECK A to operate DECK A, or to DECK B to operate DECK B. DISPLAY TIME Front panel display TIME DECK A/DECK B SCROLL DISPLAY TIME Changing the display Press DISPLAY while the unit is stopped or playing. Each time you press the button, you can...
Otros modelos de este manual:reproductores de CD - RCD-W500C (683.48 kb)