Votos - 2, Puntuación media: 3
(
)
)
|
Resumen del manual
If you fail to press PROG within about five seconds the display stops flashing and you will have to reselect the track. Press to play the program. Press again to replay the entire sequence from the start. Press and hold CLEAR to erase the programmed sequence. Press PROG again to exit the program facility. RPT (repeat) To repeat the entire CD or a pre-programmed selection of tracks press RPT once: ‘REPEAT’ lights on the display. To repeat a particular track, select that track and then press RPT twice so that ‘REPEAT 1’ is shown on the display. If you now select a different track, that track is repeated instead. To cancel the repeat function press RPT a third time. Search and Skip Track Search backwards and forwards; Skip track backwards and forwards (see page 5) OPEN Opens and closes the CD tray Playback control Pause, Play and Stop (see page 5) MUTE Stops sound to the speaker outputs of certain Arcam amplifiers. P MODE Press once to shuffle play CD tracks (i.e. play them in a random order). Press again to cancel shuffle play. Volume +/– Adjusts the volume on Arcam remote-controllable amplifiers. Note that the volume (+/–) controls and MUTE button have no effect on the audio output level of the CD players. TITLE Press TITLE once to display the remaining time of the currently playing track. Press again to display the time remaining of the disc. Press a third time to turn the text display on. Press TITLE again and the display reverts to its original setting, showing the time elapsed for the current track. For CDs with text, pressing TITLE once while the disc is loaded but not playing displays the artist’s name. Pressing TITLE a second time displays the total number of tracks and the total playing time. NOTE: Remember to install the two AAA batteries supplied before trying to use your remote control. Do not place anything in front of the display area on the CD player (where the IR receiver is located), or the remote control may not work. Note that greyed-out buttons on the remote control are DVD-specific and are not used with the CD player. Remote-control codes The following table gives the IR-commands accepted by the CD192. Items shown in italics reference the buttons on the supplied CR-314 remote control. The items not in italics are additional commands accepted by the CD192. Power commands Command Decimal Code Power toggle 20–12 Power-on 20–123 Power-off 20–124 Playback control commands Command Decimal Code Track number ‘n’, (e.g., 1) 20–n (e.g., 20–1) Track selection 10+ 20–10 Time 20–66 Remain 20–11 Track forward 20–32 Track back 20–33 Fast forward 20–52 Fast rewind 20–50 Open 20–45 Pause 20–48 Stop 20–54 Play 20–53 Advanced control commands Command Decimal Code Repeat toggle 20–29 Repeat off 20–125 Repeat one 20–126 Repeat all 20–127 Repeat A-B 20–59 Search 20–76 Scan 20–43 Scan 10 seconds 20–79 Scan 20 seconds 20–88 Scan 30 seconds 20–90 Scan off 20–90 Clear 20–58 Clear all 20–57 Programme 20–41 Programme on 20–99 Programme off 20–100 PMode (Shuffle) 20–64 Shuffle 20–28 Shuffle on 20–114 Shuffle off 20–115 Display control commands Command Decimal Code Display toggle 20–18 Display on 20–14 Display dim 20–20 Display off 20–21 Display remaining track time 20–110 Display elapsed track time 20–111 Display remaining disk time 20–112 Display remaining titles 20–113 English CD192 E-9 Guarantee Worldwide Guarantee This entitles you to have the unit repaired free of charge, during the first two years after purchase, at any authorised Arcam distributor provided that it was originally purchased from an authorised Arcam dealer or distributor. The manufacturer can take no responsibility for defects arising from accident, misuse, abuse, wear and tear, neglect or through unauthorised adjustment and/or repair, neither can they accept responsibility for damage or loss occurring during transit to or from the person claiming under the guarantee. The warranty covers: Parts and labour costs for two years from the purchase date. After two years you must pay for both parts and labour costs. The warranty does not cover transportation costs at any time. Claims under guarantee This equipment should be packed in the original packing and returned to the dealer from whom it was purchased, or failing this, directly to the Arcam distributor in the country of residence. It should be sent carriage prepaid by a reputable carrier — NOT by post. No responsibility can be accepted for the unit whilst in transit to the dealer or distributor and customers are therefore advised to insure the unit against loss or damage whilst in transit. For further details contact Arcam at: Arcam Customer Support Department, Pembroke Avenue, Waterbeach, CAMBRIDGE, CB5 9QR, England Problems? If you have a problem, always contact your dealer in the first instance. If your dealer is unable to answer any query regarding this or any other Arcam product please contact Arcam Customer Support and we will do our best to help you. On line registration You can register yo...