Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
Adult assembly is required. Tools needed for assembly: Phillips Screwdriver and Adjustable Wrench (both not included). Requires three “D” (LR20) alkaline batteries for operation (not included). Maximum Weight Limit: 24 lbs. (10.9 kg.) The maximum weight limit for this product is 24 lbs. IMPORTANT! If your child weighs less than 24 lbs., but is really active and appears to be able to climb out of the swing, immediately discontinue its use. Swing Cradle Cradle Swing Discover what’s possible™…Model Number: 79595, 79596 Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Tools needed for assembly: Phillips Screwdriver and Adjustable Wrench (both not included). Requires three “D” (LR20) alkaline batteries for operation (not included). Maximum Weight Limit: 24 lbs. (10.9 kg.) The maximum weight limit for this product is 24 lbs. IMPORTANT! If your child weighs less than 24 lbs., but is really active and appears to be able to climb out of the swing, immediately discontinue its use. Swing Cradle Cradle Swing Discover what’s possible™…2 Warnings and Caution Parts • To prevent falls, never use with an active child who may be able to climb out of the seat. • Never leave child unattended. • To prevent injury or death from falls or sliding out, always use restraint system. Never rely on the tray to restrain child. WARNING This product contains small parts in its unassembled state. Adult assembly is required. CAUTION Motorized Frame 2 Lower Legs 2 Upper Legs Seat 2 Feet 2 Elbow Feet Tray Mobile Pad Seat Tube Activity Toy Bar ALL SHOWN ACTUAL SIZE #8 x 1/2" Pointed Screw - 2 M4 x 31.5 mm Bolt - 2 M4 Lock Nut - 2 #8 x 3/4" Pointed Screw - 2 Seat Tube Arm 2 Warnings and Caution Parts • To prevent falls, never use with an active child who may be able to climb out of the seat. • Never leave child unattended. • To prevent injury or death from falls or sliding out, always use restraint system. Never rely on the tray to restrain child. WARNING This product contains small parts in its unassembled state. Adult assembly is required. CAUTION Motorized Frame 2 Lower Legs 2 Upper Legs Seat 2 Feet 2 Elbow Feet Tray Mobile Pad Seat Tube Activity Toy Bar ALL SHOWN ACTUAL SIZE #8 x 1/2" Pointed Screw - 2 M4 x 31.5 mm Bolt - 2 M4 Lock Nut - 2 #8 x 3/4" Pointed Screw - 2 Seat Tube Arm 2 SHOWN ACTUAL SIZE Assembly 1 3 Lower Leg • Fit a foot onto the end of the lower leg. • Insert a #8 1/2" pointed screw through the bottom of the foot and into the lower leg. Tighten the screw with a Phillips screwdriver. Do not over-tighten. • Repeat assembly steps 1 and 2 to assemble the other elbow foot and foot to the other lower leg. • Position one of the lower legs so that the long portion is down. • Fit an elbow foot, with the cup side down, onto the bend in the lower leg. • Insert a #8 3/4" pointed screw through the bottom of the elbow foot and into the lower leg. Tighten the screw with a Phillips screwdriver. Do not over-tighten. • Stand each lower leg upright, as illustrated. • The elbow foot and foot should be flat against the floor. IMPORTANT! Before each use or assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed. Never substitute parts. Foot Cup Side Down • Position an upper leg so that the red dot is upward. • While pressing the button on the straight end of an upper leg, insert the upper leg into a lower leg. Make sure the button on the upper leg “snaps” into the hole in the lower leg. • Repeat this procedure to assemble the other upper leg to the other lower leg. Elbow Foot Lower Leg Long Portion Lower Leg Elbow Foot Foot SHOWN ACTUAL SIZE #8 x 3/4" Pointed Screw - 2 #8 x 1/2" Pointed Screw - 2 Correct Incorrect 3 4 Red Dot Lower Leg Upper Leg Straight End Button Hole 2 SHOWN ACTUAL SIZE Assembly 1 3 Lower Leg • Fit a foot onto the end of the lower leg. • Insert a #8 1/2" pointed screw through the bottom of the foot and into the lower leg. Tighten the screw with a Phillips screwdriver. Do not over-tighten. • Repeat assembly steps 1 and 2 to assemble the other elbow foot and foot to the other lower leg. • Position one of the lower legs so that the long portion is down. • Fit an elbow foot, with the cup side down, onto the bend in the lower leg. • Insert a #8 3/4" pointed screw through the bottom of the elbow foot and into the lower leg. Tighten the screw with a Phillips screwdriver. Do not over-tighten. • Stand each lower leg upright, as illustrated. • The elbow foot and foot should be flat against the floor. IMPORTANT! Before each use or assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed. Never substitute parts. F...
Otros modelos de este manual:Accesorios de Bebes - 79595 (1.55 mb)