FRONT TOP POLE BACK MIDDLE POLE RIM BOTTOM POLE STRUTS ELEVATOR ASSEMBLY BACKBOARD BASE 1. Correctly identify each pole section. Poles have an identification sticker that will be used as a reference point in the next step. 3 2 4 Reference Stickers TOP MIDDLE BOTTOM Toll-Free Customer Service Number for U.S. : 1-800-558-5234 7 12/04 P/N 21473501 IMPORTANT! ONCE POLE SECTIONS ARE POUNDED TOGETHER- THEY CANNOT BE TAKEN APART 2. 3 2 4 TOP MIDDLE BOTTOM alignment mark alignment mark Align poles using

Check system before each use for stability. DO NOT use system during windy and/or severe weather conditions, system may tip over. Place system in the storage position and/or in an area protected from the wind and free from personal property and/or overhead power lines. During play, use extreme caution to keep player's face away from the backboard, rim or net. Serious injury could occur if teeth/face come in contact with backboard, rim or net. When adjusting height or moving unit, keep hands and

5. Minimum distance should be 106” (2.7 m) from top elevator hole to playing surface. Homeowner must assume all responsiblilty for any personal or property damage if backboard height is lower then recommended. WARNING 106” (2.7 m) 3-1/2” (8.9 cm) 6 7 2 3 NOTE: Hardware for this procedure not included due to various roof construction materials and design structure. NOTE: Two people recommended for this procedure. Hold angled brackets (6 and 7) on roof and keep u-channel (2) upright. Measure from

NOT SUITABLE FOR CHILDREN UNDER THREE YEARS OF AGE DUE TO SMALL PARTS/CHOKING HAZARD. WARNING Read and understand operator's manual before using this unit. Failure to follow operating instructions could result in injury or damage to property. REQUIRED TOOLS AND MATERIALS: • Phillips Head Screwdriver Toll-Free Customer Service Number for U.S: 1-800-558-5234, For Canada: 1-800-284-8339, For Europe: 00 800 555 85234 (Sweden: 009 555 85234), For Australia: 1-800-333 061 Internet Address: 1 07/03 P/N

1 35 29 29 33 33 33 33 35 30 30 Support pole on sawhorse. Attach backboard assembly to top pole section (1). NOTE: Two people are required for this step, use caution, elevator assembly is heavy. 31 31 TWO PERSON MINIMUM REQUIRED FOR THIS PROCEDURE. NOT FOLLOWING RECOMMENDATION MAY RESULT IN SERIOUS BODILY INJURY AND/OR PROPERTY DAMAGE. WARNING 1 35 29 29 33 33 33 33 35 30 30 Support pole on sawhorse. Attach backboard assembly to top pole section (1). NOTE: Two people are required for this step,

TOOLS SUPPLIED: TOOLS NEEDED: • 1 Allen Wrench • Wrench (4 mm & 6 mm) • 2 People TOOLS SUPPLIED: TOOLS NEEDED: • 1 Allen Wrench • Wrench (4 mm & 6 mm) • 2 People SHARP OBJECT INFLATION NEEDLE KEEP OUT OF REACH OF SMALL CHILDREN. NOT FOR CHILDREN UNDER 3 YEARS. CHOKING HAZARD SMALL PARTS: INFLATION NEEDLE AND SMALL HARDWARE. NOT FOR CHILDREN UNDER 3 YEARS. KEEP BAGS AWAY FROM BABIES AND CHILDREN. DO NOT USE IN CRIBS, BEDS, CARRIAGES OR PLAYPENS. THE THIN FILM MAY CLING TO NOSE AND MOUTH AND PREVE

To ensure safety, do not attempt to assemble this system without following the instructions carefully. Check entire box and inside all packing material for parts. Before beginning assembly, read the instructions and identify parts using the hardware identifier and parts list in this document. Proper and complete assembly, use and supervision is essential for proper operation and to reduce the risk of accident or injury. A high probability of serious injury exists if this system is not installed,

A high probability of serious injury exists if this system is not installed, maintained, and operated properly. • If using a ladder during assembly, use extreme caution. • Two (2) capable adults are recommended for this operation. • Climate, corrosion, or misuse could result in system failure. • Minimum operational height is 7'6" (2.3 m) to the bottom of backboard. • This equipment is intended for home recreational use only and NOT excessive competitive play. • Read and understand the warning la

WARRANTY CARD: Please remember to complete your product registration form either on-line at: or mail-in the enclosed postcard. 3 11/03 P/N 211644 Item Qty. Part No. Description 1 1 Rim 2 2 202604 Bolt, Carriage 3/8 x 4.75” Long 3 2 203474 Washer, Flat, 1”O.D. 4 2 203017 Hex Nut, 3/8” 5 2 203063 Nylon Lock-Nut, 3/8” 6 8 203232 Washer, 3/4” O.D. 7 2 200484 Spring, Zinc 8 2 202601 Washer, Flat 9 2 202602 Lock Washer 10 2 202523 Spacer 11 2 203439 Bolt, Hex, 3/8 x 6” Long 12 2 220140 Screw, Self-Tap

2. While holding pole, rotate basketball system forward until wheels engage with ground. 3. Move basketball system to desired location. 4. Carefully rotate basketball system upright. 5. Reattach ground restraint and check system for stability. HEIGHT ADJUSTMENT TO ADJUST BACKBOARD: 1. TO RAISE BACKBOARD: Slowly push up on the rim broom handle or wooden dowel, 3/4 - 7/8 (19mm - 22mm) diameter as shown to engage locking mechanism at desired height. 2. TO LOWER BACKBOARD: Push lever up to unlock an