Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
After you have finished assembling your stroller keep this booklet for future reference. Please note that if you don't follow the instructions you or your child could be seriously injured. Correct assembly of the stroller is vital and outside of the manufacturer's and distributor's liability. introductionDon't throw your box away! It's good to keep it around so you have it if you need to ship or transport your stroller in the future. Check to make sure you have all the parts and necessary items needed to assemble the stroller. If you don't have something that is pictured please call our customer service line at 800.278.9626. introductionwatch fingers when folding - folding mechanism could be a pinching hazardTurn the stroller over so the foot plate is down. Lift the stroller by the handle until it clicks. assemblysun canopyheight adjustable handlefront quickrelease wheelfork tipsthumb tabharnesspocketsbasketcanopy windowwater bottleholderswheel release latchhand brakefoot braketriggerrear wheel foam protectorTo put the rear wheels on, push the wheel axle into the stroller frame. Remove and discard the foam protectors on the wheel axles. be sure to discard the plastic bags from the wheels - they are a suffocation hazard for childrencheck to make sure the wheels are secure before each useassemblyTip the stroller back so it is resting on its handle and rear wheels to put the front wheel on. Remove the fork tip protectors. Make sure the brake release lever is pointed out, away from the stroller. lever pointed out Starting at the bottom of the brake pads, push the wheel up and in between the brake pads. The quick release lever should be straight out. While holding the lever, tighten the thumb nut until it is barely snug. The axle should not move side to side. Rotate the tire upwards and find the flat sides on the round axle and slide all the way to the back of the forks, on BOTH assemblyPush the quick release lever down so it is flush with the frame. Give the wheel a tug to make sure it is secure. Be sure to close the brake calipers by pushing the lever forward all the way. flat sidebrake padsthumb nutquick release levercheck to make sure the wheel is secure before each uselever forwardcheck to make sure the brake caliperis locked before each use Make sure the seat strap is snapped around the frame on both sides, by the basket. To lock the hand brake, pull the lever in and hold it while you push the button down. As you hold the button down, release the brake lever. Your stroller comes with two parking brakes: a foot brake and a hand brake. The hand brake, located on the handle, locks the front wheel. The foot brake is located near the basket, on the rear axle. It locks the rear wheels. assemblybrakesTo release the hand brake pull the lever in until the button pops up. NEVER trust your brakes 100%! Always keep an eye on your stroller. Always use your safety wrist strap any time a child is in the stroller. check to make sure the brake caliperis locked before each usePull the foot brake up with your foot to release it. To lock the foot brake you simply push it down with your foot. Then try to push the stroller to make sure the brake is secure. seat strapIf the front wheel still moves, see the brake adjustment section on page 24You should always use both brakes when the stroller is not being pushed. leverpush buttonbrake locked Your canopy has multiple adjustments to fill all of your's and your child's needs. To bring the canopy to it's next position, flip the mesh portion under. Use the canopy at it's fully extended position during midday sun to provide your child with the most amount of shade. bubble sun canopy™ When the canopy is not needed, pull it all the way back. To view your child through the top window, simply roll back the sun cover and velcro into place. To clean the canopy window use a damp cloth. To remove the sun canopy you will need a Phillips screwdriver to remove the screws from both sides of the canopy. Unsnap the canopy from the back and lift it out. Before washing the canopy, remove the frame. The canopy may be washed in cold water with mild detergent. Place the canopy back on the stroller to dry. bubble sun canopy™ seatThe seat is removed by undoing the velcro and the straps from the foot plate and the frame. The seat also needs to be unsnapped from the frame. The seat may be washed in cold water with mild detergent. Snap the seat back on the frame to dry, to prevent mildewing. unscrew hereIt may be snug, but it will lift out. When the canopy is wet, extend it fully until completely dry to prevent any mildew from forming. velcro straps harness Your stroller has many places to store your stuff. There is a pocket located on the back of the seat, as well as pockets for keys or a cell phone on both sides. There are also two water bottle holders located on the back of your stroller. storageAnother place for storage is the basket under the seat. WARNING Do not store more than 12 pounds between the poc...