Votos - 4, Puntuación media: 3.8 ( )

Fabricar: Cornelius Tamaño del archivo: 39.79 kb Nombre del archivo: Idioma del manual:

DISPENSER HOOD 6. Install KEY-LOCK SWITCH (item 5) in the hood as shown in Figure 1 and secure with HEX NUT (item 4). 7. Refering to Wiring Diagram (Figure 2) disconnect black electrical wire, with push-on terminal on it’s end, from terminal on the transformer outlet. 8. Connect black electrical wire, disconnected from the transformer outlet terminal, to mating electrical wire terminal on the WIRING HARNESS (item 1). 9. Connect other electrical wire of the wiring harness to output terminal on the transformer where the black electrical wire was disconnected from in step 7 preceding. 10. Connect other two wiring harness terminals to two terminals on the Key-Lock Switch. 11. Install hood on the Dispenser. 12. Connect electrical power to the Dispenser, then check Dispenser for proper operation. 13. Insert LOCK KEY (item 3) in key-lock switch, then check Dispenser for proper operation. H I GH VOLT TRANS- FORMER —=Q SW I TCH (DOMEST1C UN ITS ONLY) BLACK OR BROWN BROWN INTEGRAL CARBONATOR UN ITS ONLY ORANGE BLACK INTEGRAL CARBONATOR UN ITS ONLY KEY-LOCK SWITCH (ITEM 5 ) VALVES 569000261 FIGURE 2. WIRING DIAGRAM 2...

Descargar ahora

Introduzca dos números de la imagen: