Votos - 2, Puntuación media: 5
(
)
)
|
Resumen del manual
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the unit’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the unit. 3 LOCATION OF CONTROLS AND INDICATORS 3 4 5 6 7 0 0 8 8 Unit . On/Off . s 3. Ў 4. Left Chilling/Warming Chamber Control 5. Right Chilling/Warming Chamber Control 6. Select 7. Blue LED Indicator Display 9 – will display CHEERS at end of chilling/warming cycle 8. Ready Indicator Lights 9. Power Adapter 0. Plastic Sleeve 4 WINE CHILLER/WARMER OPERATION Using the Wine Chiller/Warmer . Insert one end of the power adapter into the Wine Chiller/Warmer (make sure adapter is securely in place) and plug the other end into an electrical outlet. . Insert wine or champagne bottle into the left or right side aluminum reservoir. 3. Raise the plastic sleeve to cover the bottle. 4. Press On/Off until the display illuminates blue. 5. Press L or R for left or right chilling/warming chamber. 6. Press SELECT to enter the Wine Library. 7. Press Up/Down keys to select red wine, white wine or Champagne. 8. Press SELECT again, then press s or Ў to select your specific wine or Champagne. 9. Press SELECT again and cooling or warming (using the bar graph). 0. When cooling/warming process has been completed, LCD will display CHEERS ! and a full bar graph. . After the cooling/warming process has been completed, the unit will cycle off for approximately 3 minutes and then will automatically resume the cooling/warming process to maintain the preset temperature. See conditions below. begins. The LCD indicator display is set up to show the left and right side preset temperatures and status 5 Two conditions remain: . The bottle is left in the unit over a period of time. The wine chiller/warmer will cycle to maintain the preset temperature, which means the current temperature will fluctuate slightly within 3 to 4 degrees. . If the bottle is removed from the wine chiller/warmer and then put back into it after a few minutes, it will automatically start chilling/warming to the preset temperature until the unit is turned off. Approximate Chilling/Warming Times Preset Temperature Time Red Wine 64.F 24 minutes White Wine 48.F 75 minutes Champagne 45.F 95 minutes * Actual cooling time will depend on room ambient temperature, the initial temperature of the wine being chilled, the bottle size (as related to surface contact area to the interior of the bucket), volume of wine in the bottle, and use of insulation sleeve. * Starting temperature of approximately 73.F. CARE AND MAINTENANCE Always disconnect before cleaning. Wipe with a damp cloth, then dry. Do not use abrasive cleaning agents. 6 ©2007 Waring Products Division of Conair Corporation 150 Milford Road East Windsor, NJ 08520 Printed in China PC200 IB 07WR32145 IB 7664 ...
Otros modelos de este manual:Dispensers - PC200 (157.48 kb)