Votos - 1, Puntuación media: 3
(
)
)
|
Resumen del manual
Check the circuit electrical capacity. Unit does The unit is unplugged from wall outlet. Plug the cord into an outlet. not run completely. Power outlet for power plug prong is loose. Check the power outlet and replace a new one. Power Cord or Power plug is damaged- Unplug it first, check one by one. Maybe some problem happened inside the unit, like the fuse on the PCB has blown Contact the service man by calling the service telephone number The unit has started just now or has run for only one or two hours. Please wait more hour again because the unit has low cooling capacity itself The wine bottle is too hot when being placed in. Please wait more time again. The door is not completely closed. Close the door properly. Unit does not cool sufficiently The unit is exposed to direct sunlight, is too close to a heat source, or is being operated in an excessively hot environment. Relocation the unit. The air inlet or outlet vent is obstructed. Remove the blockage near the air inlet and outlet vent of the unit. Leave enough space around unit. The door is being opened and closed too often. We suggest that it better not open the door during first several hours of the working of the unit, and decrease the times of opening and closing the door. The fan-motor in the cooling compartment or on the condenser side is not working. Call the service man by service telephone number. The thermoelectric module is bad. Call service man to replace a new module. MoreThanCool" THERMOELECTRIC WINE COOLER INSTRUCTION MANUAL Model: FRW080UK -8- • Read this manual carefully before using this product. • Follow all warnings and instructions. • Keep it for future reference. IGLOOTM and the IGLOO logo are trademarks of IGLOO Products Corp. used by C.l. Ltd. under license. Table of Contents Tips Safety Precaution Feature Specification Installation instruction Operation Storing wine bottle Using product ................. Tips Cleaning and maintenance Troubleshooting............................................. Page .............3 4 ............5 .............5 6 6 6 .............7 .............7 8 1) To accelerate your wine cooler’ cooling speed, pre-cool your wine bottle in your home refrigerator before placing them in the cooler for a short time, but not in freezing compartment because the bottle will break if the wine become ice. 2) Do not use ice inside the cooler. Water from melting ice will flow out of the unit. 3) Condensation will form in the unit during operation. Quickly wipe it any moisture the form inside the unit. And condensation is normal, not a sign of malfunction. Cleaning and Maintenance Unplug the wine cooler before cleaning or servicing your cooler. 1) All surface maybe cleaned with a small amount of dishwashing solution applied with a damp sponge or soft cloth. Do not over-saturate the sponge or cloth. Dry all water from inside cooler with a dry towel. 2) To prevent odors from accumulating inside the unit, leave the door open for several hours to let it emit out. 3) Never immerse the unit in water. Never wipe the unit using thinner, benzene or spray cleaners. Do not rub the unit with a scrubbing brush, cleaners, etc. 07/08 HICON/FRW080UKi.^;l^i^Bfl4i4P-2||^:lGLOOM1i Operation Storing wine bottle * The unit has two racks inside the cooling compartment. Each rack permits you to place 4 wine bottles, so it can totally contain 8 wine bottles inside. * When putting the wine bottle inside, let the lid of the bottle face out to take It easily. And don’t place or operate it roughly. And put the wine bottle inside as possible to avoid the glass contact with the lid of the bottle. After this, close the door properly. Using the product 1) After putting the wine bottle inside the unit and plugging the power supply plug. 2) Press Setting Temperature Decreasing Button or Setting Temperature Increasing. Button to your desired temperature. 3) Let the unit run continuously. Note: ■ Close the door properly. Otherwise it will affect the cooling speed. * When first using the unit, need you wait at least 4-6 hours according the room temperature around the unit and the Initial temperature of the bottle. -6- Feature Safety Precaution To prevent personal injury, injury to others, or damage to property, read and follow these safety precautions carefully before use and place this product. Warning 1) Do not immerse in water or pour water on the unit. Always shelter your unit from rain and snow. 2) Do not let children use the product lonely. Keep infants away. 3) Do not use flammable items such as gasoline, thinner or aerosol spray. Keep flammables away from unit. 4) Do not store medicine or items requiring precise temperature control. 5) This unit must not be disassembled, repaired or modified by anyone except the person authorized by manufacture or an expert person. 6) Keep the unit far away from the direct sunlight whenever in using or not. 7) Do not oper...