Votos - 1, Puntuación media: 5
(
)
)
|
Resumen del manual
Complete ‘ready-to-use’ product Supplied as a single printed circuit board as the AXIS 82+ Developer Board, or packaged within a durable aluminum casing in the AXIS 83+ Device Server, these otherwise identical products are equipped with external connectors for dual* 100 MBit Ethernet, USB, COM1, COM2, and RS-485 connection. They are also equipped with internal connectors that accommodate one parallel port and an additional serial port. Enclosed in a black aluminum casing, the AXIS 83+ Device Server is compliant with immunity, emission and safety standards, and is ready for immediate deployment into industrial and other environmentally hostile environments. Improve your time to market The AXIS 83+ Device Server is shipped as a ready-to-use device, which means that you spend no time at all on hardware development, authority approval testing, purchasing, or programming Ethernet addresses. Once your application is complete, the software is simply flash-loaded to the Device Server Platform, using FTP (File Transfer Protocol). With the AXIS 82+/83+ you are free to completely customize all software, including the Linux kernel. If your application is successful and you then want to progress to building your own product, Axis also supplies the ETRAX chip for use in your own custom product designs. Partnership Development Axis is committed to open-source development and fully supporting its customers. Advanced technical support is available, as well as open discussion forums to facilitate good communication between the wide range of ETRAX system developers. Reference designs are available upon request. . Programmable Device Server with Linux 2.4/2.6 . 100 MIPS performance . Full source code available . Certified for industrial use *Two Ethernet ports: Full 100 MBit Ethernet with secondary Ethernet port limited to 12 MBit. AXIS 82+ Developer Board / AXIS 83+ Device Server AXIS 82+ Developer Board / AXIS 83+ Device Server Technical Overview RS485/422 Terminal Block Operating Environment • Product-ready device server platform based on the AXIS ETRAX 100LX MCM 4+16 chip. The product ships with a pre-installed Linux operating system and pre-programmed Ethernet address. Full source code is available for all applications and drivers at developer.axis.com Ethernet Network Connection • Primary Physical network connection on 10BaseT Ethernet or 100BaseTX Fast Ethernet networks using RJ45 twisted pair cable • Secondary Physical network connection on 10BaseT Ethernet or 100BaseTX Fast Ethernet, but limited in speed to 12 MBit/s since it is connected through an internal USB port. Actual routing speed is 4.5 MBit between the two interfaces Serial Connection • Two RS232 serial ports terminated with 9 pin MALE D-SUB connectors, both ports support RXD, TXD, RTS, CTS, DSR, DTR, RI (not on COM1) and CD at baud rates up to 115200 bps • One RS485/422 serial port supported on a • Temperature: +5°C to +50°C single screw terminal block. Supports baud • Humidity: 8-80% RHG, non-condensing rates up to 1843200 bps Product Warranty • A one-year warranty is included Pin...
Otros modelos de este manual:Cine en casa - Developer Board and Device Server AXIS 83+ (1.98 mb)