Votos - 2, Puntuación media: 4
(
)
)
|
Otros manuales para este modelo:
Cine en casa - HT-CT350 (11.31 mb)
Cine en casa - HT-CT350 (11.36 mb)
Resumen del manual
• Check that the cords are fully inserted into the jacks on both the component and this system (pages 22, 24). No 3D image appears on the TV. • Depending on the TV or the video component, 3D images may not be displayed. Check the 3D image formats supported by the system (page 55). When the system is in standby mode, there is no image or sound on the TV. • “CTRL HDMI” is set to “OFF.” • When the system is in standby mode, image and sound are output from the HDMI component selected the last time you turned off the system. If you want to play a component other than the HDMI component you selected last time, play the component via One-Touch Play, or turn on the system to select the HDMI component you want to enjoy. • Make sure “PASS THRU” is set to “ON” in the AMP menu if you connect components not compatible with “BRAVIA” Sync to the system (page 41). The remote does not function • Point the remote at the remote sensor on the system. • Remove any obstacles in the path between the remote and the system. • Replace both batteries in the remote with new ones, if they are weak. • Make sure you select the correct input on the remote. OTHER Control for HDMI does not work properly. • Check the HDMI connection (page 22). • Set up Control for HDMI on the TV (page 38). • Make sure the connected component is compatible with “BRAVIA” Sync. • Check the Control for HDMI settings on the connected component. Refer to the operating instructions supplied of the connected component. • If you change the HDMI connection, connect/disconnect the AC power cord (mains lead), or if there is a power failure, repeat the procedures of ““BRAVIA” Sync Features” (page 38). • When you plug in or unplug the AC power cord (mains lead), wait 15 seconds or more before operating the system. continued 53GB Additional Information • • “CTRL HDMI” to “OFF” (page 39) or connect the audio output jack directly to the TV instead of the system. If “PROTECTOR” and “PUSH POWER” appear alternately in the front panel display. Press ?/1 to turn off the system, and check the following item after “STANDBY” disappears. • Is anything blocking the ventilation holes of the system? After checking the above item and fixing any problems, turn on the system. If the cause of the problem cannot be found even after checking the above item, consult your nearest Sony dealer. If the system still does not operate properly after performing the above measures, reset the system as follows: Use buttons on the system for the operation. 1 Press ?/1 to turn on the power. 2 Press ?/1 while pressing INPUT SELECTOR and VOLUME –. “COLD RESET” appears and the system is reset. AMP menu, sound field, etc., return to the default settings. Specifications Formats supported by this system Digital input formats supported by this system are as follows. Format Supported/Not supported Dolby Digital a DTS a Linear PCM (2ch)* a Linear PCM (5.1ch, a 7.1ch)* (Only on HDMI) Dolby Digital Plus . Dolby True HD . DTS-HD . * Linear PCM accepts sampling frequencies of no more than 48 kHz. Amplifier section Power output (rated) Front L / Front R: 65 W + 65W (at 4 ohms, 1 kHz, 1 % THD) Power output (reference) Front L/Front R: 100 W (per channel at 4 ohms, 1 kHz) Center: 100 W (at 4 ohms, 5 kHz) Subwoofer: 100 W (at 4 ohms, 100 Hz) Inputs TV, SA-CD/CD Analog TV, SAT/CATV Digital (Optical) VIDEO Digital (Coaxial) 54GB HDMI section HDMI section HDMI™ connector Video inputs/outputs BD, DVD, SAT/CATV; 640 . 480p@60 Hz 720 . 480p@59.94/60 Hz 1280 . 720p@59.94/60 Hz 1920 . 1080i@59.94/60 Hz 1920 . 1080p@59.94/60 Hz 720 . 576p@50 Hz 1280 . 720p@50 Hz 1920 . 1080i@50 Hz 1920 . 1080p@50 Hz 1920 . 1080p@24 Hz Video inputs/outputs (3D) BD, DVD, SAT/CATV; 1280 . 720p@59.94/60 Hz Frame packing 1920 . 1080i@59.94/60 Hz Frame packing 1920 . 1080i@59.94/60 Hz Side-by-Side (Half) 1920 . 1080p@59.94/60 Hz Side-by-Side (Half) 1280 . 720p@50 Hz Frame packing 1920 . 1080i@50 Hz Frame packing 1920 . 1080i@50 Hz Side-by-Side (Half) 1920 . 1080p@50 Hz Side-by-Side (Half) 1920 . 1080p@24 Hz Frame packing Audio inputs BD, DVD, SAT/CATV: Linear PCM 7.1ch/ Dolby Digital/DTS Tuner section System PLL quartz-locked digital synthesizer FM tuner section Tuning range 87.5 - 108.0 MHz (50 kHz step) Antenna (aerial) FM wire antenna (aerial) Antenna (aerial) terminals 75 ohms, unbalanced Intermediate frequency 10.7 MHz AM tuner section Tuning range 531 kHz - 1,602 kHz (with the interval set at 9 kHz) Antenna (aerial) AM loop antenna (aerial) Intermediate frequency 450 kHz Speaker (SS-CT350) Front speaker unit Speaker system Full range Speaker unit 40 mm . 70 mm, cone type . 2 Rated impedance 4 ohms Center speaker unit Speaker unit 40 mm, cone type . 2 Rated impedance 4 ohms Dimensions (approx.) 996 mm . 66 mm . 72 mm (w/h/d) Mass (approx.) 2.4 kg Speaker cords 3 m Subwoofer (SA-WCT350) Speaker system Subwoofer, Bass reflex Speaker unit 130 mm cone type Rated impedance 4 ohms Dimensions (approx.) 196 mm . 450 mm . 410 mm (w/h/d) Mass (approx.) 10.5 ...