Votos - , Puntuación media:
(
)
)
Fabricar: Samsung
Tamaño del archivo: 8.78 mb
Nombre del archivo:
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Otros manuales para este modelo:
Resumen del manual
press ENTER button. ENTER button. • If you have selected Level 6, you • The password is set to "7890" by default. cannot view DVDs with Level 7 or • Once the setup is complete, you will be higher. taken to the previous screen. • The higher the level, the closer the content is to violent or adult material. • This function works only if a DVD disc contains the rating level information. Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. SETUP Setting the Password You can set the password for the Parental (rating level) setting. Press Cursor button to move to 1 Press MENU button. 2 ‘Setup’ and then press ENTER button. • The password is set to "7890" by default. Press Cursor button to Press ENTER Enter the password move to ‘PASSWORD’ button. and then press and then press ENTER 345 ENTER button. button. • Enter the old password, a new password, and confirm new password. • The setting is complete. Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. SETUP Setting the Wallpaper While watching a DVD, VCD or JPEG CD, you can set the image you like as a wallpaper. Setting the Wallpaper During playback, press Press LOGO PLAY/PAUSE button button. when the image you like comes up. 12 •“ COPY LOGO DATA PAUSE The power will turn off Press OPEN/ and then back on and CLOSE to close 34 the disc tray will open the disc tray. automatically. Select this to set the Select this to set the desired Samsung Logo image as image as your wallpaper. your wallpaper. To Change the Wallpaper Press Cursor Press Cursor Press MENU button to move to button to move to button. ‘Setup’ and then ‘LOGO’ and then press ENTER button. press ENTER button. 12 3 Press to select Press MENU the desired ‘USER’, button to exit the 4 5 and then press setup screen. ENTER. Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. SETUP Setting the Speaker Mode Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not. Press Cursor button to move to Press MENU button. ‘Audio’ and then press ENTER button. 1 2 Press Cursor , , In the Speaker , buttons to move Setup, press the to the desired 3 4 ENTER button again. speaker and then press ENTER button. • For C, LS, and RS, each time the button is pressed, the mode switches alternately as follows: SMALL . NONE. • For L and R, the mode is set to SMALL. SMALL : Select this when using the speakers. NONE : Select this when no speakers are installed. • Depending on PRO LOGIC and STEREO, the speaker mode may vary. Setting the Test Tone Press the Test Tone to check the speaker connections and to adjust the speaker levels. 1 Press MENU button. 2 Press Cursor button to move to ‘Audio’ and then press ENTER button. 3 Press Cursor button to move to ‘TEST TONE’ and then press ENTER button. • The test tone will be sent to L . C . R . RS . LS . SW in that order. If the ENTER button is pressed again at this time, the test tone will stop. Press RETURN button to return to the previous level. Press MENU button to exit the setup screen. L: Front Speaker (L) C: Center Speaker SW: SubwooferWhen manually testing using the TEST TONE button R: Front Speaker (R) LS: Rear Speaker (L) RS: Rear Speaker (R) Press TEST TONE button. Multi-Channel Pro Logic Mode • Test tone will be produced as follows: When playing a DVD or CD, this will work only in Stop mode. • Use this function to check that each speaker is Start correctly connected and that there is no problem. SETUP To end the test tone, press TEST TONE button. Setting the Delay Time If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and rear speakers. 2 2 Press Cursor button to move to ‘Audio’ and 1 Press MENU button. then press ENTER button. Setting up the Speaker Delay Time When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same. Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Center Speaker and Surround Speakers. • With (Dolby Pro Logic II), the delay time may be different for each mode. • With AC-3 and DTS, the delay time is set between 00 and 15mSEC. Press Cursor , , Press Cursor button , buttons to move Press Cursor , to move to ‘DELAY to the desired to set the Delay TIME’ and then press 345 speaker and then time. ENTER button. press ENTER button. • You can set the delay time for C between 00 and 05mSEC and for LS and RS between 00 and 15mSEC. • Setting CENTER SPEAKER If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table. Distance between Df and Dc Dela...
Otros modelos de este manual:Cine en casa - HT-DS100B (8.78 mb)