Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
14 Operating
With wired connection
AUTO POWER On/Off
1. Connect your LG TV to the unit by using an
This unit automatically turns on by an input source :
optical cable. (Refer to the pages 10 - 11.)
Optical, LG TV or Bluetooth.
2. Set up the sound output of TV to listen to the
When you turn on your TV or an external device
sound through this unit :
connected to this unit, this unit recognizes the
TV setting menu [ [Sound] [ [TV Sound
input signal and select the suitable function. You
output] [ [LG Sound Sync (Optical)]
can hear the sound from your device.
3. Turn on the unit by pressing 1 (Power) on the
If you try to connect your Bluetooth device, this unit
2
remote control.
turns on and ready to pair. Connect your Bluetooth
Oper
4. Select OPTICAL function by using OPTICAL on
device and play your music.
the remote control.
You can turn on or off AUTO POWER function by
a
ting
Green LED on the unit is lit up and you can
using AUTO POWER ON/OFF switch on the rear
listen to the TV's sound.
panel of the unit.
, Note
With wireless connection
y After the unit is turned on by AUTO POWER
1. Turn on the unit by pressing 1 (Power) on the
function, it will be automatically turned off if
remote control.
there is no signal for a certain period of time
2. Select LG TV function by using LG TV on the
from the TV connected by LG Sound Sync
remote control. Then white LED on the unit
(Optical/Wireless).
starts to blink.
y After the unit is turned on by AUTO POWER
3. Set up the sound output of TV to listen to the
function, it will be automatically turned off if
sound through this unit :
there is no signal for a certain period of time
TV setting menu [ [Sound] [ [TV Sound
from the external device.
output] [ [LG Sound Sync (Wireless)]
y AUTO POWER function is initially turned on.
When connection is completed normally
y If you turned off the unit directly, it cannot
between this unit and your TV, white LED on
be turned on automatically by AUTO POWER
the unit is lit up.
function. However the unit can be turned
, Note
on by AUTO POWER function when optical
signal comes in after 5 seconds of no signal.
y If you turned off the unit directly by pressing
1 (Power), LG Sound Sync (Wireless) will
y Depending on the connected device, this
be disconnected. To use this function again,
function may not operate.
you should reconnect the TV and the unit.
y When booting this unit on LG TV fucntion,
y Details of TV setting menu vary depending
it takes about 25 seconds to turn it on and
on the manufacturers or models of your TV.
the red LED is blinking twice per second.
During that time, you cannot control this
y The device with Bluetooth® wireless
unit except turn it off.
technology will be disconnected, if Sound
Sync function is selected. “LG Bluetooth
y If you used Bluetooth or LG TV function
Remote” app you’ve already connected is
before turning off this unit, the unit keeps
disconnected either.
the current function when Bluetooth or LG
TV signals comes in.
Besides, if you used optical function, this
unit turns on Bluetooth function when LG
TV signal comes in.
LAP340-NB_DDEULLF_ENG.indd 14
2014-05-20 2:18:09
...Otros modelos de este manual:
Cine en casa - SOUNDPLATE340 (825.07 kb)
estéreo - LAP340-NB (825.07 kb)