Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Remote Control (1) Battery (1) Power cord (1) Optical cable (1) Cable holder (1) Screw (2) Cable ties for arranging cables (2) Getting Started 7 Getting Started 1 Front panel ARemote sensor BLED indicator You can check the current state of the unit by the colour LED on it. Refer to the table below. LED Colour LED State Red Orange Green White Off Power on or disconnected power cord On Standby --- Blink ( Twice rapidly) CINEMA SOUND is off. - CINEMA SOUND is on. - Blink ( Twice per second) Booting Bluetooth ready - LG sound sync (LG TV ) ready Blink (Once per second) Mute --- On -> Off (After 3 seconds) -Bluetooth paired Optical function selected LG sound sync (LG T V ) paired Rear panel A BC D A1/! (Standby/On) C AUTO POWER ON/OFF Turns on or off AUTO POWER function. o/p( Volume) Adjusts speaker volume. DAC power input F (Function) Press it repeatedly to select other function. BOptical input 8 Getting Started 1 Remote control Getting Started Switches the unit ON or OFF. Reduce the sound volume. Mutes or unmutes the sound. Select LG TV function. Turns on or off CINEMA SOUND function. Increase the sound volume. Select Optical function. Select Bluetooth function. yOnce the unit is shut down to standby, please wait several seconds before trying to use remote again. yWhen you press any button on the remote control, the red LED on the main unit blinks twice. (Except 1 (Power), CINEMA SOUND) yThe colour LED that indicates the current function is lit up for about 3 seconds when you press the function buttons : h, OPTICAL, LG T V. yThe red LED on Unit will be lit If the volume level is adjusted between minimum to maximum. yThe red LED blinks twice rapidly when CINEMA SOUND function is off. yThe green LED blinks twice rapidly when CINEMA SOUND function is on. , Note Getting Started 9 Battery installation 3. Put the battery cover on the remote control and turn it clockwise to close. >Caution Do not open the battery cover by using your finger. Or else, your nail could break. 1 1. Turn the battery cover counterclockwise by using a coin. Then take the battery cover. 2. Insert and fix the battery with the minus (-) facing in the same direction as the minus (-) on the battery compartment. + !Warning DO NOT INGEST BATTERY. CHEMICAL BURN HAZARD. >Caution • The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble, incinerate, or heat above 100 °C (212 °F). Replace the battery part no. CR2025 only. Use of another battery may present a risk of fire or explosion. Dispose of used battery. Keep battery away from children. Do not disassemble or dispose of in fire. Getting Started • [ The remote control supplied with] This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. 10 Getting Started 1 >Caution Setting up the unit • Do not try to set up this unit alone. It may need at least 2 persons to lift your TV. This unit is designed to be positioned under your Otherwise it may result in a personal injury T V. and/or property damages. Getting Started Before setting up this system with your TV, make sure your TV's specifications. • Weight • Do not connect a CRT type TV to this unit. Because this unit contains magnetic parts, colour irregularity may occur on the TV screen. • Do not put the other objects except a TV or a monitor on the unit. • The unit must be set up on a stable and horizontal surface. • Do not put any other object between the unit and the supporting furniture when you set up the unit. Recommendation Max. 38 kg 1. Place the unit on the position where you want to place your T V. • Size of the base It is recommended to set up the unit on a sufficiently firm and horizontal surface. , Max. 270 mm Max. 680 mm Getting Started 11 Getting Started 1 2. Connect the optical cable and the power cord to the unit. 3. Connect another end of optical cable connecting the unit to your TV. You can arrange the cables of the unit. 1. Fix the cable holder with screws. 2. Arrange the cables as the below. , Note 4. Place your TV on the centre of the unit. 5. Plug in the power cord of the unit. 12 Getting Started 1 Getting Started >Caution How to Affix the Ferrite Core • Do not place your TV on the edge of this (Optional) You may need to attach Ferrite core in order to reduce or eliminate any electrical interference. unit. Otherwise it may result in a personal injury and/or property damages. yIf your TV is over recommended weight (max 38 kg) or has a Base larger in area than the Unit do NOT place TV on the Unit. -In this case, it is recommended to place this system in another location such as on the shel...