Votos - 1, Puntuación media: 5
(
)
)
|
Resumen del manual
Red part 5-1. Bit 7-2. Angle head 1-2. Button 5-2. Sleeve 8-1. Groove 1-3. Battery cartridge 6-1. Groove 8-2. Tooth 2-1. Switch trigger 6-2. Screw 9-1. Straight head 3-1. Lamp 6-3. Hook 10-1. Ratchet head 4-1. Reversing switch lever 7-1. Hex bolt SPECIFICATIONS Model BTL060 BTL061 Capacities Machine screw 4 mm -8 mm Bolt 4 mm - 12 mm No load speed (min-1) 0 - 2,000 Impacts per minute 0 - 3,000 Max. fastening torque 60 N•m Overall length 387 mm Net weight 1.6 kg 1.7 kg Rated voltage D.C. 14.4 V D.C. 18 V • Due to our continuing programme of research and development, the specifications herein are subject to change without notice. • Note: Specifications may differ from country to country. END001-1 Symbols The following show the symbols used for the equipment. Be sure that you understand their meaning before use. . Only for EU countries Do not dispose of electric equipment together with household waste material! In observance of European Directive 2002/96/EC on waste electric and electronic equipment and its implementation in accordance with national law, electric equipment that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. ENE033-1 Intended use The tool is intended for screw driving in wood, metal and plastic. For Model BTL060 ENG102-1 For European countries only Noise The typical A-weighted noise level determined according to EN60745-2-2: Sound pressure level (LpA) : 91 dB(A) Sound power level (LWA) : 102 dB(A) Uncertainty (K) : 3 dB(A) Wear ear protection ENG205-1 Vibration The vibration total value (tri-axial vector sum) determined according to EN60745-2-2: Work mode : impact tightening of fasteners of the maximum capacity of the tool Vibration emission (ah) : 9 m/s2 Uncertainty (K) : 1.5 m/s2 For Model BTL061 ENG102-1 For European countries only Noise The typical A-weighted noise level determined according to EN60745-2-2: Sound pressure level (LpA) : 90 dB(A) Sound power level (LWA) : 101 dB(A) Uncertainty (K) : 3 dB(A) Wear ear protection ENG205-1 Vibration The vibration total value (tri-axial vector sum) determined according to EN60745-2-2: Work mode : impact tightening of fasteners of the maximum capacity of the tool Vibration emission (ah) : 11 m/s2 Uncertainty (K) : 1.5 m/s2 ENH102-6 EC-DECLARATION OF CONFORMITY Model; BTL060,BTL061 We declare under our sole responsibility that this product is in compliance with the following standards of standardized documents; EN60745, EN55014 in accordance with Council Directives, 2004/108/EC, 98/37/EC. CE2006 000230 3 Tomoyasu Kato Director Responsible Manufacturer: Tomoyasu Kato Director Responsible Manufacturer: 3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPAN Authorized Representative in Europe: Makita International Europe Ltd. Michigan Drive, Tongwell, Milton Keynes, Bucks MK15 8JD, ENGLAND GEB012-2 SPECIFIC SAFETY RULES DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to impact driver safety rules. If you use this tool unsafely or incorrectly, you can suffer serious personal injury. 1. Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator. 2. Always be sure you have a firm footing. Be sure no one is below when using the tool in high locations. 3. Hold the tool firmly. 4. Wear ear protectors. SAVE THESE INSTRUCTIONS. WARNING: MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. ENC004-1 IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CARTRIDGE 1. Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. 2. Do not disassemble battery cartridge. 3. If operating time has become excessively shorter, stop operating immediately. It may result in a risk of overheating, possible burns and even an explosion. 4. If electrolyte gets into your eyes, rinse them out with clear water and seek medical attention right away. It may result in loss of your eyesight. 5. Always cover the battery terminals with the battery cover when the battery cartridge is not used. 6. Do not short the battery cartridge: (1) Do not touch the terminals with any conductive material. (2) Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc. (3) Do not expose battery cartridge to water or rain. A battery short can cause a large current flow, overheating, possible burns and even a breakdown. 7. Do not store the tool and battery cartridge in locations where the temperature may reach or exceed 50. C (122. F). 8. Do not incinerate the battery cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire. 9. Be careful not to drop or strike battery. SAVE THESE INS...
Otros modelos de este manual:Taladros y shuropopverty - BTL060 (953.88 kb)