Iniciar sesión:
Votos - 4, Puntuación media: 4.5 ( )

Manual de usuario GE, modelo DJXR433

Fabricar: GE
Tamaño del archivo: 381.67 kb
Nombre del archivo:
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


10 Loading and using the dryer. Always follow the fabric manufacturer’s care label when laundering. Sorting and Loading Hints As a general rule, if clothes are sorted properly for the washer, they are sorted properly for the dryer. Do not overload. This wastes energy and causes wrinkling. Do not dry the following items: fiberglass items, woolens, Do not add fabric softener sheets once the load has rubber-coated items, plastics, items with plastic trim and become warm. They may cause fabric softener stains. foam-filled items. Bounce® Fabric Conditioner Dryer Sheets have been approved for use in all GE Dryers when used in accordance with the manufacturer’s instructions. The Exterior: Wipe or dust any spills or washing compounds with a damp cloth. Dryer control Stainless Steel: To clean stainless steel surfaces, use a damp cloth with a mild, non-abrasive Care and Cleaning of the Dryer Consumer SupportTroubleshooting Instructions panel and finishes may be damaged by some laundry pretreatment soil and stain remover products. Apply these products away from the dryer. The fabric may then be washed and dried normally. Damage to your dryer caused by these products is not covered by your warranty. The Lint Filter: Clean the lint filter before each use. Moisten your fingers and reach into the filter opening. Run your fingers across the filter. Have a once a year. Fabric Care Labels qualified technician vacuum the lint from the dryer 3 2 1 cleaner suitable for stainless steel surfaces. Remove the cleaner residue, and then dry with a clean cloth. The Exhaust Duct: Inspect and clean the exhaust ducting at least once a year to prevent clogging. A partially clogged exhaust can lengthen the drying time. Follow these steps: Turn off electrical supply by disconnecting the plug from the wall socket. Disconnect the duct from the dryer. Vacuum the duct with the hose attachment and reconnect the duct. The Exhaust Hood: Check from the outside that the flaps of the hood move freely when operating. Make sure that there is no wildlife (birds, insects, etc.) nesting inside the duct or hood. Below are fabric care label “symbols” that affect the clothing you will be laundering. WASH LABELS DRY LABELS Machine wash cycle Normal Permanent Press/ Gentle/ Do not wash Do not wring wrinkle resistant delicate Hand wash Water temperature Hot Warm Cold/cool (50°C/120°F) (40°C/105°F) (30°C/85°F) Tumble dry Dry Normal Permanent Press/ wrinkle resistant Gentle/ delicate Do not tumble dry Do not dry (used with do not wash) Heat setting High Medium Low No heat/air Specialinstructions Line dry/ hang to dry Drip dry Dry flat In the shade BLEACH LABELS Bleach symbols Any bleach Only non-chlorine bleach Do not bleach (when needed) (when needed) 11 Operating Instructions Safety InstructionsConsumer Support Troubleshooting Tips Loading and using the dryer. Always follow the fabric manufacturer’s care label when laundering. Venting the Dryer For the best drying performance, th...

Otros modelos de este manual:
Taladros y shuropopverty - DX2300 (381.67 kb)
Taladros y shuropopverty - DHDSR45 (381.67 kb)
Taladros y shuropopverty - DBSR453 (381.67 kb)
Taladros y shuropopverty - DBXR463 (381.67 kb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría