Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
Make sure operation instruc-wrenches before turning machinery tions are safe and clearly under-ON. stood. 18. CHECK FOR DAMAGED PARTS 8. KEEP CHILDREN AND VISITORS BEFORE USING MACHINERY. AWAY. Keep all children and visi-Check for binding and alignment tors a safe distance from the work of parts, broken parts, part mount- area. ing, loose bolts, and any other conditions that may affect machine 9. MAKE WORKSHOP CHILD operation. Repair or replace dam- PROOF. Use padlocks, master aged parts. switches, and remove switch keys. 19. USE RECOMMENDED 10. NEVER LEAVE WHEN MACHINE ACCESSORIES. Refer to the IS RUNNING. Turn power OFF instruction manual for recomand allow all moving parts to come mended accessories. The use of to a complete stop before leaving improper accessories may cause machine unattended. risk of injury. 11. DO NOT USE IN DANGEROUS 20. DO NOT FORCE MACHINERY. ENVIRONMENTS. DO NOT use Work at the speed for which machinery in damp, wet locations, the machine or accessory was or where any flammable or noxious designed. fumes may exist. 21. SECUREWORKPIECE.Useclamps 12. KEEP WORK AREA CLEAN AND or a vise to hold the workpiece when WELL LIT. Clutter and dark shad-practical. A secured workpiece proows may cause accidents. tects your hands and frees both hands to operate the machine. 13. USE A GROUNDED EXTENSION CORD RATED FOR THE MACHINE 22. DO NOT OVERREACH. Keep AMPERAGE. Undersized cords proper footing and balance at all overheat and lose power. Replace times. extension cords if they become damaged. DO NOT use extension 23. MANY MACHINES WILL EJECT cords for 220V machinery. THE WORKPIECE TOWARD THE OPERATOR. Know and avoid con 14. ALWAYS DISCONNECT FROM ditions that cause the workpiece to POWER SOURCE BEFORE "kickback." SERVICING MACHINERY. Make sure switch is in OFF position before 24. ALWAYS LOCK MOBILE BASES reconnecting. (IF USED) BEFORE OPERATING MACHINERY. 15. MAINTAIN MACHINERY WITH CARE. Keep blades sharp and 25. BE AWARE THAT CERTAIN clean for best and safest perfor-WOODS MAY CAUSE AN ALLERmance. Follow instructions for lubri-GIC REACTION in people and anicating and changing accessories. mals, especially when exposed to fine dust. Make sure you know 16. MAKE SURE GUARDS ARE IN what type of wood dust you will be PLACE AND WORK CORRECTLY exposed to and always wear an BEFORE USING MACHINERY. approved respirator. -6- Model H7792/H7793/H7794/H7795 Cordless Drills Additional Safety Instructions for Cordless Drills 1. READ THE ENTIRE MANUAL: This manual contains proper operating instructions for this drill. 2. REMOVING/INSERTING BATTERY: Make sure the switch is in the lock (center) position before inserting or removing battery. 3. REMOVE BATTERY: Remove the battery from the drill before changing bits or making adjustments. 4. INSERTING THE BIT: Insert the bit all the way into the chuck and tighten firmly. If the bit is not inserted far enough the bit may slip. 5. REMOVING THE BIT: The bit may be hot after use. Use gloves when removing. 6. WORK AREA: DO NOT drill into walls that may contain live wires. Disconnect all power leading the work area. 7. HOLDING THE WORKPIECE: Secure the workpiece with clamps or a vise to prevent injury. DO NOT hold the workpiece in your hand or across your legs. 8. HOLDING THE DRILL: When the clutch is in the drill position, the drill can twist severely, causing a sprained wrist or pinching your hand between the drill and a solid object. Hold the drill with both hands and be aware of the drill position to prevent injury. 9. JAMMED BIT: Release the trigger, then slowly reverse the bit out of the hole. Be prepared for torque twist. 10. FORWARD/REVERSE: Wait until the drill has come to a complete stop before changing direction. 11. ENLARGING HOLES: Enlarging holes by placing sideways pressure on the drill bit may cause the bit to break and/or damage the drill mechanism. 12. TRANSPORTING: Prevent accidental entanglement with clothing and possible injury by removing the battery while carrying. 13. TOOL SERVICE: If drill is damaged or not working properly, repair it before continuing to use it. No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other machinery with caution and respect. Failure to do so could result in serious personal injury, damage to equipment or poor work results. Model H7792/H7793/H7794/H7795 Cordless Drills -7 Additional Safety Instructions for Batteries and Chargers 1. READ THE ENTIRE MANUAL: Read 6. CHARGER DAMAGE: Replace and understand all of the instructions charger if it has been dropped, dam- and warnings before charging the aged, or has received a hard impact. battery. Repair cord immediately if damaged. 2. CHARGING EQUIPMENT: Only 7. SHORTING BATTERY: Avoid touch- charge using the charger and battery ing both terminals simultaneously supplied with your drill. DO NOT use with skin or metal, to prevent injury batteries or c...
Otros modelos de este manual:Taladros y shuropopverty - H7792 (1.18 mb)
Taladros y shuropopverty - H7794 (1.18 mb)
Taladros y shuropopverty - H7795 (1.18 mb)