Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
Models G4200–G4207, & H1266–H1271 Hex Power Bits These hex shaft bits are available in 1" and 2" lengths , so they work directly in the chuck or in quick change bit holders. Figure 6.Hex power bits. G8865—Cobalt Alloy Drill Bits 13-PC. G8866—Cobalt Alloy Drill Bits 21-PC G8867—Cobalt Alloy Drill Bits 29-PC Cobalt Alloy bits will retain their edge sharpness longer than normal HSS bits, resulting in a significant saving of time and money in the workshop. Includes a heavy- gauge steel index case for storing. G8865: 1.16" -1.4"; G8866: 1.16"- 3.8"; G8867: 1.16"-1.2". Figure 7.G8865 13-PC Alloy Drill Bits. G2575—Pilot Countersink 5-PC. Set Screw holes may be drilled flush or counterbored using these quality hex shanked countersinks. Figure 8.G2575 Pilot Countersink. Model H7792/H7793/H7794/H7795 Cordless Drills -13 SECTION 4: MAINTENANCE Drill Maintenance Charger and Battery The electrical components of this cordless drill are not user serviceable. Continuous use of a worn or damaged bit will not only decrease working efficiency, but also overload the motor, so the bit must be frequently checked. Replace the bit if it is worn or damaged. Plastic parts can easily be cleaned with a damp cloth, but never use water to clean any electrical parts. Solvents should also be avoided on plastic because of the possibility of damage. Keep the drill free from dust, dirt and grease. Always store it in a dry place, preferably in the case that is supplied. Disassembly and improper reassem- bly of this device can result in elec- tricalshockdanger.Alwayshave this device serviced by an qualified electrical repair technician. Serious injury will result. The battery will require periodic recharging, and eventually replacement after it has exceeded its recharge life (approximately 800-1000 recharge cycles). You will notice extended charging times or shortened operation time as the battery experiences more cycles. Refer to the following page or the Grizzly catalog for replacement batteries. The battery must be recycled or disposed of properly. DO NOT dispose of the battery in a landfill or incinerate. Combustion of some of the battery component materials can cause toxic fumes and possible explosion. Keep the charger free from dust, dirt and grease. Always store it in a dry place, preferably in the supplied case. DO NOT store in a location that could exceed 104°F (40°C), such as a car or metal building. The electrical components of this charger are not user serviceable. Replace the charger if it has been dropped, damaged, or received a hard impact. BATTERYMUSTBE RECYCLED OR DISPOSED OFPROPERLY.Consult your local Yellow Pages directory under the category “Recycling” to locate a battery recycler in your area. -14-Model H7792/H7793/H7794/H7795 Cordless Drills Replacement Chargers and Batteries Model H7792: Replacement Battery: H8857 Replacement Charger: H8858 Model H7793: Replacement Battery: H8861 Replacement Charger: H8862 Model H7794: Replacement Battery: H8859 Replacement Charger: H8860 Model H7795: Replacement Battery: H8863 Replacement Charger: H8864 Model H7792/H7793/H7794/H7795 Cordless Drills -15 WARRANTY AND RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly’s sole written warranty and any and all warranties that may be implied by law, including any merchantability or fitness, for any particular purpose, are hereby limited to the duration of this written warranty. We do not warrant or represent that the merchandise complies with the provisions of any law or acts unless the manufacturer so warrants. In no event shall Grizzly’s liability under this warranty exceed the purchase price paid for the product and any legal actions brought against Grizzly shall be tried in the State of Washington, County of Whatcom. We shall in no event be liable for death, injuries to persons or property or for incidental, contingent, special, or consequential damages arising from the use of our products. To take advantage of this warranty, contact us by mail or phone and give us all the details. We will then issue you a “Return Authorization Number,” which must be clearly posted on the outside as well as the inside of the carton. We will not accept any item back without this number. Proof of purchase must accompany the merchandise. The manufacturers reserve the right to change specifications at any time because they constantly strive to achieve better quality equipment. We make every effort to ensure that our products meet high quality and durability standards and we hope you never need to use this warranty. Please feel free to write or call us if you have any questions about the machine or the manual. Grizzly Industrial, Inc. 1203 Lycoming Mall Circle Muncy, PA 17756 Phone: (570) 546-9663 Fax: (8...
Otros modelos de este manual:Taladros y shuropopverty - H7792 (1.18 mb)
Taladros y shuropopverty - H7793 (1.18 mb)
Taladros y shuropopverty - H7794 (1.18 mb)