Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
0 © Ensure the video input setting is correct. i»vi«a*firnl •While you are playing a disc “LINE-IN" should be off. •While you are viewing video from other equipment “LINE-IN” should be on. © Select a picture mode other than “4 (Off)”. © Ensure the power of the connected equipment is on. Picture doesn’t appear on the television (or the size of the picture seems wrong). Check connections. © Check that the television is on. Check that the input mode on the television is correct. Check the settings in “Video-TV Aspect". © LCD pixels turn black or radiate different colors. The LCD is constructed with precision technology so 99.99 % of the pixels are active, but of the remaining of 0.01 %, there are pixels that may be black or emit light constantly. This phenomenon is not a malfunction. ir^lTanqliCflGllindi cator.s The [(!)] indicator flashes when you press the button. The unit is in hold mode or “LINE IN” (^ on the unit’s display is on. Release the hold mode or press [IN/OUT] to turn off “LINE IN”. ©, © The [cl>] indicator flashes slowly. The unit is on and the LCD is closed or the display mode is set to “4 (Off)”. Turn the unit off when you have finished. The [CHG] indicator flashes. A problem occurred with the battery pack. Confirm the unit’s display ©. The [CHG] indicator flashes slowly. Battery pack charge is low. The unit will turn off automatically after a few minutes. 41 RQT5931 Troubleshooting Guide NO PLAY The unit cannot play this disc. Q “bAT Err" and a number appear on the display. “bAT Err 1”: A problem has occurred with the battery pack. Consult your dealer. “bAT Err 2”: The pack has been recharging for 12 hours but has failed to recharge for some reason. Recharge again. “bAT Err 3”: The battery pack has overheated during recharging. Allow the pack to cool down before recharging again. No On-Screen display. Go to the Display menu in the ACTION screen, and select “On” for “On-Screen Messages”. © On-Screen Menu Icons are cut off or are not displayed at all. Press [A,V] while the rightmost icon is highlighted to move them down. © U11 Wipe the disc clean. 0 H □□ □□ stands for a number. Trouble has occurred. The number appearing after H depends on the problem. Turn the unit off and on again. Alternatively, turn the unit off, disconnect the power source (AC or battery pack) reconnect the power and turn the unit on again. If the service numbers fail to clear, note the service number and contact a qualified service person. BBZJ The following do not indicate malfunction. •A sound is heard from the AC adaptor during recharging. •The battery pack warms up after recharging or during use. Maintenance I To clean this unit, wipe with a soft, dry cloth. ► Use eyeglass cleaner to remove stubborn dirt from the LCD. ■»»nay^ni »Never use alcohol, paint thinner or benzine to clean this unit. »Before using chemically treated cloth, read the instructions that came with the cloth carefully. ■ Maintenance of the lens • If dust is attached to the lens, remove dust carefully with an air blower for camera lenses (optional). Recommended product: Lens cleaner kit (S2ZP1038C) • Be careful not to touch the lens with your fingers. RQT5931 Specifications Power supply: Power consumption: AC adaptor Power supply: AC 120 V, 60 Hz Power consumption: 23 W DC output: 9 V, 1.5 A DC 9 V (AC adaptor terminal)/ DC 7.2 V (Exclusive battery terminal) 13W(8W: Unit only) 6 W (3.5 W: Unit only) Dimensions: 159 (W)x 140 (D)x27 (H) mm [61/4"{W)x572" (D)X1V16"(H)] (when the LCD screen is closed, excluding protrusions) 159 (W)x 140 (D)x16.2 (H) mm [61/4"(W)X572"(D)X5/8"(H)] (excluding protrusions) Mass: ■ mg mad 510 g (18 oz.) UJflslffiU 258 g (9.1 oz.) Operating temperature range: 5-35 °C (41-95 °F) Operating humidity range: 5-90 % RH (no condensation) Signal system: NTSC Discs played: (1) DVD disc (2) Compact disc (CD-DA, VIDEO CD) (3) CD-R/CD-RW LCD screen: 5.8" a-Si, TFT wide-screen LCD S video output: Y output level: C output level: Output terminal: 1 Vp-p (75 Q) 0.286 Vp-p (75 Q) Also used for video output/*input Video output/ input: Output/'input level: 1 Vp-p (75 Q) Output/®input terminal: Mini-jack (1 system,“Output/input selectable) Audio output/*input: Output/*input level: 1.5 Vrms (1 kHz, 0 dB) Output/*input terminal: 2 ch (MIX) Output (L/R): Stereo mini-jack (1 system, “Output/input selectable) Audio signal output characteristics: (1) Frequency response: • DVD (linear audio): 4 Hz-22 kHz (48 kHz sampling) 4 Hz-44 kHz (96 kHz sampling) •CD audio: 4 Hz-20 kHz (2) S/N ratio: •CD audio: 115 dB (3) Dynamic range: •CD audio: 97 dB Digital audio output: Optical digital output: Mini optical terminal (Also used for audio output/*input) Pickup: Wave length: 660 nm/780 nm Laser power: CLASS ll/CLASS I “DVD-PV40 does not have audio/video input. I3BB Specifications are subject to change without notice. Mass and dimensions are approximate. Power consumption in ...