Votos - 2, Puntuación media: 3.5 ( )

Fabricar: Samsung Tamaño del archivo: 822.63 kb Nombre del archivo: Idioma del manual:

Notice 1. Normal operation is not guaranteed if using the USB HUB or unspecified cables. 2. The bus power may not be operated according to the efficiency of USB power supply of the body of the PC. 3. Please use AC power for the below cases. - If using the PCI board or PCMCIA card or if using the other USB device at the same time - If writing for a long time by the USB bus power 4. Do not connect or remove the AC power during the device operation. Select Languages English This part of the manual is to prevent damages or data loss. Read carefully and use the device properly. Do not place it under the direct sunlight. Place it so that it sits on its side on a flat surface. Do not scratch or place a label on the disc. Handle the disc with caution to prevent damage from external shock. Do not expose it to severe temperature fluctuations. (Exposure to such environment may cause congealing.) Select Languages English This part of the manual is to prevent damages or data loss. Read carefully and use the device properly. Do not touch the surface of the disc. Place your fingers on the edge of the disc to hold. Clean the disc lightly with soft cotton cloth, starting from the center and move to the edge of the disc. Use only disc cleaning liquids. Do not use benzene, paint thinner, or any other solvents. If the disc surface becomes dirty with fingerprints, foreign substances or dust, the disc may not function properly. Select Languages English On/Off Lamp Meaning Disc Lead-In Green: Blinks every 0.3 seconds. Writing Green: Blinks every 0.3 seconds. Reading Green: Blinks every 0.3 seconds. Audio Playback [Analog Mode] Green: Blinks every 0.3 seconds. Audio Playback [Digital Mode] Green: Blinks every 0.3 seconds. Standby Off No Disc Off The indicator light turns off when the drive is not in use (standby) after disc lead-in. Select Languages English Problem Meaning / Solution The eject key is not working properly. See if the Drive on. If the disc still won't eject with the power on, remove USB cable, Power cord and insert an eject pin into the emergency eject hole to open. The PC is not working properly. See if the drive is properly connected to the PC. See if the floppy disc remains in the PC. The drive is not working properly. See if the drive is connected properly to the PC. See if the device drive program has been installed properly. No sound is heard from an audio CD. Check that the sound card is operational. Check the condition of the CD and wipe the surface of the CD clean before use. The computer doesn't recognize the drive. USB cable is not connected properly between the computer USB port and the drive . Ensure that both connectors of the USB cable is properly connected to the USB ports on the computer and the drive. Can be an OS problem. Try reinstalling the Windows OS program. The system won't read the disc. See if the system detects the drive. Make sure you use the types of discs that are supported by the drive. See if the on/off light turns into green. Make sure you inserted the disc with the label facing up. Make sure you are using the right program for disc playback. See if the disc is clean. See if any congealing has occurred. Make sure the region code of the drive matches the disc number. Select Languages English External DVD Writer record data on the disc by applying laser light onto the surface of the CD DVD, and therefore writing errors may occur if you use a damaged CD DVD , for example . Be sure to eliminate the following error-causing elements before you start writing: * The following settings are recommended for all External DVD Writer: Avoid a situation that requires multitasking , and remove turn off the screen saver. A buffer underrun may occur if the system multitasks while the External DVD Writer CD-RW drive is writing/erasing. Block any outside attempt to access the host PC during a writing session. An error may occur if another user accesses the printer connected to his/her the system via the network during a writing session. Disable the CD auto - run feature of the CD. Inserting an auto - run-enabled CD in to another drive connected to the same system during a writing/erasing session may cause an error. GO to Start Settings Control Panel System Hardware Device Manger CD- ROM Settings . Disable Insert AutoRun. It is recommended that you use the image file format when you write a large number of small- sized files. When there are a large number of small-sized files to write , the system's transmission rate drops and the Superlink feature works at a more frequent rate, resulting in lower writing quality. If you are doing a CD-to-CD write , it is not necessary to check to see if you have available space on your hard disc beforehand. However, in the case of image files, it is recommended that you be sure you have at least twice the amount of space needed for the data on your hard disc , as image files are copied to the hard disc before they are copied to the CD. Do not use more than one type of w...

Descargar ahora

Introduzca dos números de la imagen: