Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
English EN 16 » The CHR indicator turns on (red). It takes about 7 hours to fully charge the battery. » When the battery is fully charged, the CHR indicator turns off. Install remote control battery Caution • Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire. • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. • Batteries contain chemical substances, they should be disposed of properly. • Perchlorate Material - special handling may apply. See hazardouswaste/perchlorate. For first-time use: 1 Remove the protective tab to activate the remote control battery. To replace the remote control battery: 1 Open the battery compartment. 2 Insert 1 CR2025 battery with correct polarity (+/-) as indicated. 3 Close the battery compartment. EN 17 Connect additional equipment Caution Turn off your player before connecting to any a • dditional equipment. You can connect the player to a TV or an amplifier to enjoy DVDs or Karaoke. Match the color of the AV cables (the AV cable connected to TV is not supplied) with the jacks: • the yellow cable is for the yellow video jack • the red/white cable is for the red/white audio jacks. TV English EN not supplied 18 4 Use your player Turn on Slide the POWER ON/OFF (CHR) switch to the ON position. » The indicator turns on (green). Select OSD language You can choose a different language for the on-screen display text. 1 Press SETUP. » The setup menu appears. 2 Select [-- General Setup Page --] > [OSD Lang]. 3 Press to select an option. 4 Press OK to confirm. 5 Press SETUP to exit. Play discs 1 Slide OPEN on the player. 2 Insert the disc with label side facing up. 3 Push down to close the disc compartment. » Play starts automatically. If not, press /OK. • If a menu appears, select an item, then press /OK to start play. • To pause, press /OK. Press again to resume play. • To stop, press STOP twice. • To select the previous/next item, press or . • To start search within video/audio, press or once or more. EN Play options 1 During play, press OPTIONS to select some play options. 2 Follow the on-screen instructions. 5 Adjust settings To maximize your play experience, use SETUP to fine tune your settings. 1 Press SETUP. » The setup menu is displayed. 2 Use navigation keys to select an option and press OK to confirm. [-- General Setup Page --] [OSD Language] Select on-screen display language. [Screen Saver] Activate/deactivate screen saver. [Last Memory] Select whether to star t play from the point where it was last stopped. [Angle Mark] select angle mark display options. [-- Video Setup Page --] [Brightness] Adjust screen brightness. [Contrast] Adjust screen contrast. [TV Display] Select display ratio. [TV Type] Set video output format to TV system. [-- Battery Life Setup Page --] [LCD Backlight] Adjust the default brightness level of screen backlight. [-- Preference Page --] [Audio] Select audio language. [Subtitle] Select DVD subtitle language. [Disc Menu] Select disc menu language. [Parental] Select parental level. English [DivX Subtitle] Select DivX subtitle language. [Password] Change password (3308 by default). [DivX VOD] Get DivX registration code. [Default] Restore original settings. 3 Press to go back to the previous menu. 4 Press SETUP to exit. 6 Product information Note • Product information is subject to change without prior notice. Dimensions 239 x 39 x 178 mm Weight Power supply Power consumption Operating temperature range Laser wavelength Video output Format 1.1 kg Input: 100-240V~ 50/60Hz Output: DC 9V 0.8A 9 W 0-45°C 650 nm PAL & NTSC Output level Load impedance 1Vp - p ± 20% 75 Audio line out Audio out (analog audio) Load impedance Output level: 2V ± 10% 10 K Audio distor tion + noiseFrequency response Signal/noise ratio -80 (1KHz) 20Hz-20KHz ± 1dB 80 dB Channel separation 80 dB Dynamic range 80 dB 7 Troubleshooting Warning • Risk of electric shock. Never remove the casing of the player. To keep the warranty valid, never tr y to repair the system yourself. If you encounter problems when using the player, check the following points before requesting ser vice. If the problem remains unsolved, register your player and get suppor t at No power • Ensure that both plugs of the mains cord are properly connected. • Ensure that there is power at the AC outlet. • Check if the built-in batter y is drained. No sound • Ensure that the AV cable is connected correctly. Distorted picture • Clean the disc. With a clean, sof t, lint-free cloth, wipe the disc outwards from the center. • Make sure that the video output format of the disc is compatible with the T V. • Change the video output format to match your T V or program. • The LCD is manufactured using high precision technology. You may, however, see tiny black points and/or bright points(red, blue, green) that continuously appear on the LCD. This is a normal result of the manufacturing process a...