Votos - 3, Puntuación media: 4.7
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
• Do not expose the remote sensor (marked on the front panel) to strong light, such as direct sunlight or a lighting apparatus. The recorder may not respond to the remote. • When you replace the batteries of the remote, the code number and Command Mode may be reset to the default setting. Set the appropriate code number and Command Mode again. Hookups and Settings ,continued Controlling TVs with the remote Controlling TVs with the remote If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. You can adjust the remote’s signal to control your TV. b • Depending on the connected unit, you may not be able to control your TV with some or all of the buttons below. • If you enter a new code number, the code number previously entered will be erased. Number buttons TV [/1 TV/DVD TV t TV 2 +/– TV PROG +/– 1 Hold down TV [/1 located at the bottom of the remote. Do not press the [/1 button at the top of the remote. 2 With TV [/1 pressed down, enter the TV’s manufacturer code using the number buttons. For instance, to enter “09,” press “0” then “9.” After you enter the last number, release the TV [/1 button. Manufacturer Code number Sony 01 (default) Grundig 11 Hitachi 24 ITT 15, 16 JVC 33 LG/Goldstar 76 Loewe 45 Nokia 15, 16, 69, 73 Panasonic 17, 49 Philips 06, 07, 08, 72 Saba 12, 13, 74 Samsung 22, 23, 71 Sanyo 25 Sharp 29 Telefunken 36 Thomson 43, 75 Toshiba 38 The remote performs the following: Buttons Operations TV [/1 Turns your TV on or off. TV 2 (volume) Adjusts the volume +/– of your TV. TV PROG +/– Selects the programme position on your TV. TV t (input Switches your TV’s select) input source. To operate the TV/DVD button (for SCART connections only) To operate the TV/DVD button (for SCART connections only) Changing programme positions of the recorder using the remote You can change programme positions of the recorder using the number buttons. Example: for channel 50 Press “5,” “0,” then press . Step 6: Easy Setup Make the basic adjustments by following the on-screen instructions in “Easy Setup.” Be careful not to disconnect the cables or exit the “Easy Setup” function during this procedure. [/1 Otros modelos de este manual:
lector de DVD - RDR-DC100 (8.71 mb)
lector de DVD - RDR-DC200 (8.71 mb)
lector de DVD - RDR-DC205 (8.71 mb)