Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
The network configuration and connection method may vary depending on the equipment in use and the network environment. Wireless Communication DLNA certified servers Access Point or Wireless Router Broadband service Refer to the setup instructions supplied with your access point or wireless router for detailed connection steps and network settings. For best performance, a direct wired connection from this player to your home network’s router or cable/DSL modem is always the best option. If you do chose to use the wireless option, note that performance can sometimes be affected by other electronic devices in the home. Wireless network setup For the wireless network connection, the player needs to be set up for network communication. This adjustment can be done from the [Settings] menu. Adjust the [NETWORK] setting as follow. Setting up the access point or the wireless router is required before connecting the player to the network. Preparation Before setting the wireless network, you need to: -- connect the broadband internet to the wireless home network. -- set the access point or wireless router. -- note the SSID and security code of the network. 1. Select [Connection Setting] option in the [Settings] menu then press Wheel (a). 2. Read the preparations for the network settings and then press Wheel (a) while [Start] is highlighted. If wired network is not connected to the unit, all available networks are displayed on the screen. 3. Use w/s to select a desired SSID of wireless network and press Wheel (a). If you have security on your access point, you need to input the security code as necessary. If you use other characters than the english alphabet or digits for the SSID name of your access point or wireless router, it may be displayed differently. ,,Note y WEP security mode generally have 4 keys available on an access point setting. If your access point or wireless router use WEP security, enter the security code of the key “No.1” to connect on your home network. y An Access Point is a device that allows you to connect to your home network wirelessly. , 20 Connecting Advanced Setting If you want to set the network settings manually, use w/s to select [Advanced Setting] on the [Network Setting] menu and press Wheel (a). 1. Use w/s to select [ Wireless] and press Wheel (a). 2 Note Connecting 4. Use w/s/a/d to select the IP mode between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically. Note , If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server]. 5. Select [Next] and press Wheel (a) to apply network settings. Network connection status is displayed on the screen. 6.Select [OK] and press Wheel (a) to complete the network connection. [AP List] - Scans all available access points or wireless routers within range and display them as a list. [Network name (SSID)] – Yo...