Votos - , Puntuación media:
(
)
)
Fabricar: Freecom Technologies
Tamaño del archivo: 360 kb
Nombre del archivo: f5988458-e2d7-4cab-a63b-f5ebfb7dc69f.pdf
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Resumen del manual
• Operate the Freecom drive only in a horizontal position, to prevent damage to the media or mechanical parts. • Operate the device only at temperatures ranging from 10 - 35 °C. • Do not use the device in a dusty and humid environment. • Protect the drive from shocks and other mechanical effects! • The device should not be operated in the vicinity of strong electromagnetic radiation sources (loudspeakers, mobile telephones etc.). • Due to the high data transfer rates, the cable length should not exceed 1 m. Error-free transmission cannot be guaranteed for longer cables. • The DVD RW Recorder is USB 2.0 compliant. While USB 2.0 supports CD recording speeds higher than 4x, if this drive is connected to a USB 1.1 port the maximum CD recording speed is 4x. GB Freecom DVD RW Recorder Freecom DVD RW Recorder GB 1 Chapter 1: Start Up 1.1 Hardware installation 1. Connect the interface cable to the Freecom DVD RW Recorder. 2. Connect the cable of the power supply to the Freecom DVD RW Recorder and the power supply itself to the socket. 3. Connect the interface cable to the interface port of your computer. 4. Switch on the Freecom DVD RW Recorder. 6 Since USB .0 is backwards compatible with USB 1.1, the Freecom DVD RW Recorder can beconnectedtoallUSB ports.Whenconnected to a USB1.1 port, however,theperformance(datatransferrate)oftheFreecomDVDRW Recorder will be much lower than when the drive is connected to a USB .0 port. GB 1 Start Up Note: You can plug the USB cable into your computer and unplug it while the computer is running ("hot plug & play"). Remove the cable from the computer when doing so, never remove the cable from the drive when the computer is on. For optimal performance, the Freecom DVD RW Recorder should always be connected to a USB .0 port. GB 1 Start Up Note: You can plug the USB cable into your computer and unplug it while the computer is running ("hot plug & play"). Remove the cable from the computer when doing so, never remove the cable from the drive when the computer is on. For optimal performance, the Freecom DVD RW Recorder should always be connected to a USB .0 port. 1. Power Switch The Freecom DVD RW Recorder is always powered, even if the USB cable is disconnected from your computer. Therefore, please turn off the Freecom DVD RW Recorder if it is not used. The power switch is on the back side of the Freecom DVD RW Recorder. Attention! Before switching off the Freecom DVD RW Recorder manually, make sure to safely remove the Freecom DVD RW Recorder via your op- erating system (the „unplug or eject hardware“ option in the Windows taskbar). Failing to do so may result in loss of data. Note: In the event of no sound when an audio CD is placed into the Free- com DVD RW Recorder, "Enable Digital CD audio for this CD-ROM device" from within "Control Panel"-"Multi Media". 7 Freecom DVD RW Recorder Freecom DVD RW Recorder GB 1 1. Driver Installation Under Windows 2000 , XP and Vista a separate driver is not required. The drivers will be installed automatically by the operating system after plugging in the Freecom DVD RW Recorder into the USB port of your computer. Your Freecom DVD RW Recorder is fully backwards compatible with USB 1.1. The installation for USB 1.1 is the same as described below for USB 2.0. 1.4 Allocation of the drive letter to the Freecom drive After successfully completing the installation of the Freecom DVD RW Recorder, a new drive letter is assigned automatically (the first available letter after the internal DVD RW Recorders). This can shift the drive letter of an internal CD-ROM drive (for example, 'D' to 'E'). If this leads to problems, it is possible to change the drive letter assignment as follows: 1. Click "Start" - "Settings" - "Control Panel" - "Administration" - "Computer Administration". 2. Click "Disk Maintenance" and then select the Freecom drive. 3. In the "Operation" menu ("Action" in Windows XP), select All Tasks and then click Change drive letter and path. 4. In the next window, click "Change" and select a drive letter in Assign the following drive letters. 5. Click "Yes" to confirm your change. Installing the application software Installing the application software Chapter 2: Installing the application software To record blank media, you must first install the Recording Software. We recommend using the software which has been provided with your drive. To install the application software, insert the "Application & Manuals" CD, klick "Easy Media Creator". Follow the instructions on screen. GB 2 Note: If you wish to use other software, please find out from the supplier whether his products support the Freecom DVD RW Recorder. Freecom DVD RW Recorder Freecom DVD RW Recorder GB .1 Special Instructions before Writing a CD / DVD • You should realize that writing CD/DVDs is principally a sensitive data transmission procedure which can be disrupted by even the smallest mechanical disturbance. • Never clean the Freecom DVD RW Recorder with a commercially available CD or a...