Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
The “MEMORY” indication and the “00” station indication will be flashing on the LCD display for 3 seconds. \l/ $ MEMORY$ si ii i£ iro.nn UU " IUL • UUmhz /i\ 3. ¡OorO 4. 5. a CD disc and close the CD compartment lid. Ejecting - after the playback stops open the CD compartment lid and eject the disc. Put the disc in the case for storage. Always close the CD compartment lid in order to prevent it from getting dust. Always eject a disc from the CD compartment if it is not being played back. 1. Switch on the cassette recorder by pressing the POWER button. 2. Select the CD playback mode. To select it press the FUNCTION button successively until the “CD” indication appears on the LCD display. 3. Open the CD compartment. Insert a CD disc and close the CD compartment. Number of tracks and total playback time will appear on the LCD display. Use the PRESET/FOLDER ^ or' buttons to select the station number from 1 to 20, under which you want to store the radio station. Press the MEMORY/CLK-ADJ button again, to store the settings. Repeat steps 1 - 4 for all radio stations, which you want to store in memory. Note: you must select the station number while the MEMORY indication is flashing, otherwise the station will not be stored in the memory. If the indication disappears before you select the number of the station, repeat steps 1-4. PROGRAMMED RADIO STATIONS RECALL To recall the programmed radio stations select the corresponding frequency band (FM or MW (AW)) and press the PRESET/FOLDER © or © buttons successively to select the desired radio station. Note: The preset stations are stored in memory, while the device is plugged in and the battery is not low. When the power is off or the battery is low the preset radio stations will be erased from memory. You will need to program them again. CD PLAYBACK Loading - open the CD compartment lid. Insert DISC” indication appears on the LCD display, check whether the disc is inserted properly. The disc should be inserted with the label up. 4. To playback the disc from the first track press the PLAY/PAUSE button. You can select a track, which will be played back first. To do it, select a track using the SKIP TUNING w or m buttons, then press the PLAY/PAUSE button. 5. To pause the playback, press the PLAY/ PAUSE button again. The “PLAY” indication and the playback time will be constantly flashing. To resume to playback mode press the button once again. 6. To stop the playback, press the STOP button. Note: if the CD compartment lid is open, the “OPEN” indication will appear on the LCD display. PROGRAMMED PLAYBACK You can program playback of tracks (max. 60 tracks) in a desired sequence. 1. Switch on the cassette recorder by pressing the POWER button. 2. Open the CD compartment. Insert a CD disc 9 3965IM.indd 9 07.07.2008 15:37:00 ENGLISH З. and close the CD compartment. When the CD playback is stopped, press the MEMORY/CLK-ADJ button. The “MEMORY” indication will be flashing on the LCD display, and track number on the disc and its programmed number “P-01 ” will be \l/ \ $ MEMORY$ П 0 .. n ~J и 1 IJL J Select the desired track, successively pressing the SKIP TUNING or m button. To store the selected track press the MEMORY/CLK-ADJ button. Programming indication will switch to “Р-2”. \l/ $ MEMORY$ П 0.. П I U I U I 4. 2. To repeat all tracks on the disc press the REPEAT/MONO-ST button twice, The “REPEAT PLAY REPEAT ALL \ 3 П- no L u- и и V -J 3. To cancel the repeat mode press the REPEAT/MONO-ST button until the repeat indication disappears. RANDOM PLAYBACK This function allows you to playback tracks in random order. 1. Press the RANDOM button once, the “RANDOM” indication will appear on the LCD display, random playback will start. 'play random J n. no L U- U U Programming the next track: select the next track, successively pressing the SKIP TUNING or m buttons. Then press the MEMORY/CLK-ADJ button to store the selected track in memory. You can program up to 60 tracks. Press the MEMORY/CLK-ADJ button successively to look through the list of programmed tracks. To playback press the PLAY/PAUSE button. To stop the playback, press the STOP button. To erase programmed playback press the STOP button, when the playback stops, open the CD compartment lid. REPEAT PLAYBACK This function allows repeating all tracks on the disc or programmed discs. 1. To repeat one track press the REPEAT/ MONO-ST button once, the “REPEAT” indication 2. To cancel the random playback mode, press the RANDOM button again, the “RANDOM” indication will disappear. PLAYING MP3 DISCS This appliance can playback most of MP3 discs but there are cases when the disc is not played back due to the settings of the software used for recording this disc. 1. Switch on the cassette recorder by pressing the POWER button. 2. Select discs playback mode. To select it press the FUNCTION button successively until the “MP3” indication appears on the LCD di...