Votos - 4, Puntuación media: 4.5 ( )

Fabricar: Lennox Hearth Tamaño del archivo: 227.78 kb Nombre del archivo: Idioma del manual:

Consult your local distributor for fi replace code information. NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. 1110 West Taft Avenue • Orange, CA 92865 Figure 5 - COMPLETED INSTALLATION Swing the bottom of the doorframe inward, then push into place Figure 4 - INSTALL DOORFRAME 3. Remove the arched screen doorframe from packaging, then install it as follows: a. Locate slots on each side of fi replace. b. Position the top of the doorframe above the top of the glass door assembly (centered and approximately 1” above glass door assembly). See Figure 4. Note: The bottom of the doorframe should be held slightly away as shown in Figure 4. Swing the bottom of the doorframe inward aligning the sides of the doorframe between the glass door and fireplace chassis and tabs on doorframe aligning into slots on fireplace. Swing the bottom of the doorframe in, then push down to ensure engagement. 4. Ensure that the latch(es) below the door are engaged with the door’s veefl ange and fully closed before operating the fi replace (see Figure 3). 5. (Units with Modesty Panels) Reinstall modesty panel, ensuring all wires are securely connected. 6. If applicable, reinstall the top louver assembly, radiant panels or hood. 7. Reinstall or close the bottom louver or radiant panel. ...

Descargar ahora

Introduzca dos números de la imagen: