Votos - 4, Puntuación media: 3.8
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
• If you connect two or more USB devices to a single computer at the same time, some devices, including your camera, may not operate, depending on the types of USB devices you are using. • Operations are not guaranteed when using a USB hub. • Connecting your camera using a USB interface that is compatible with Hi-Speed USB (USB 2.0 compliant) allows advanced transfer (high speed transfer) as this camera is compatible with Hi- Speed USB (USB 2.0 compliant). • There are three modes for a USB connection when connecting a computer, [Auto] (default setting), [Mass Storage] and [PTP] modes. This section describes the [Auto] and [Mass Storage] as examples. For details on [PTP], see page 81. • When your computer resumes from a suspend or sleep mode, communication between your camera and your computer may not recover at the same time. Your computer restarts. Now, you can establish a USB connection. Copying images to your computer Using your computer This section describes the process using a Windows computer as an example. You can copy images from the camera to your computer as follows. For directly inserting the recording medium in a computer Remove the recording medium from the camera and insert it in the computer and copy the images. For connecting the camera with the recording medium inserted to a computer using the USB connection Follow Stages 1 through 5 on pages 85 to 89 to copy images. • The screen displays shown in this section are the examples for copying images from “Memory Stick”. Stage 1: Installing the USB Driver • A driver is software that enables equipment connected to the computer to operate properly. • When using Windows XP, start from Stage 2. • When “PicturePackage” is already installed, start from Stage 2. NOTE: Do not connect the camera to the computer at this time. 1 Shut down all application software in use. • In Windows 2000, log on as Administrator (authorized Administrators). 2 Insert the CD-ROM (Cyber-shot application software) into the computer, then click [USB Driver] when the install menu screen appears. The “InstallShield Wizard” screen appears. • If the install menu screen does not appear, double-click (My Computer) t (PICTUREPACKAGE). 3 Click [Next]. The USB driver installation starts. When the installation is finished, the screen informs you of completion. 4 Click the radio button next to [Yes, I want to restart my computer now] to select it, then click [Finish]. 1 2 Remove the CD-ROM when the installation is completed. Stage 2: Preparing the camera 3 Turn on the camera and the and the computer computer. 1 Insert a recording medium with recorded images into the camera. ON POWER • Use the /CF switch to select the recording medium (t step 3 in “Read This First”). 2 Connect the camera to a wall outlet (wall socket) with the AC Adaptor. AC Adaptor To a wall outlet • When you copy images to your computer using the battery pack, copying may fail or image data may become corrupted if the battery pack shuts down too soon. Using your computer Stage 3: Connecting the camera and your computer USB cable (supplied) 1To a USB connector 2To the (USB) jack • With Windows XP, the AutoPlay wizard appears on the desktop. “USB Mode Mass Storage” appears on the screen of the camera. USB Mode MENUSwitch on Mass Storage Memory Stick Access indicators* When a USB connection is established for the first time, your computer automatically runs a program to recognize the camera. Wait for a while. * During communication, the access indicators turn red. Do not operate the computer until the indicators turn white. • Opening the “Memory Stick”/CF card cover cancels the USB connection. Do not open the “Memory Stick”/CF card cover during a USB connection. • If “USB Mode Mass Storage” does not appear, set [USB Connect] to [Mass Storage] (page 81). Stage 4-A: Copying images to a computer • For Windows 98/98SE/2000/Me, follow the procedure explained in “Stage 4-B: Copying images to a Computer” on page 88. • For Windows XP, when the wizard screen does not appear automatically, follow the procedure explained in “Stage 4-B: Copying images to a Computer” on page 88. This section describes an example of copying images to a “My Documents” folder. 1 After making a USB connection in Stage 3, click [Copy pictures to a folder on my computer using Microsoft Scanner and Camera Wizard] t [OK] as the wizard screen appears automatically on the desktop. 1 2 The “Scanner and Camera Wizard” screen appears. 2 Click [Next]. The images saved on the recording medium of the camera appear. 3 Click the check box of unwanted images to remove the checkmark so they are not copied, then click [Next]. 1 2 1 2 Image copying starts. When the copying is completed, the “Other Options” screen appears. • This section describes an example of copying images to the “My Documents” folder. 5 Click the radio button next to [Nothing. I'm finished working with these pictures] to select it, then click [Next]. 1 2 The “Completing the Scanner and Camera Wizard” sc...