Votos - 4, Puntuación media: 3
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
x Printing An error is displayed on the camera and you cannot print images. • The ink ribbon does not match the paper type. Insert the correct print paper that matches the ink ribbon loaded to the printer. To change the ink ribbon, stop printing, and replace the ink ribbon, then resume printing. Print paper does not feed. The printer may feed multiple paper. The printer may feed paper diagonally. • If the print paper is not properly loaded to the printer, it may cause a malfunction. Check the followings: – Check if the correct set of print paper and ink ribbon is loaded. (tpage 11) – Check if the print paper is inserted in the correct direction. (tpage 15) – Check if more than 20 sheets of print paper are in the paper tray. (tpage 15) – Check if the print paper is riffled thoroughly. – Check if the print paper is bent or folded before printing. – If print paper runs out during continuous printing or if you print with no print paper in the paper tray, the printer’s ERROR indicator lights on. Feed the print paper without turning off the power and resume printing. • Print paper you used is incompatible with the printer. Use print paper designed for the printer. Using print paper incompatible with the printer may cause a malfunction. (tpage 11) • When the printer cannot feed print paper, the ERROR indicator flashes rapidly. Remove the paper tray and check if there is a paper jam. (tpage 25) The print paper comes out while printing is in process. • The print paper may come out a few times during printing. Do not touch or pull out the paper that appeared. Wait for the print paper to be fully ejected after printing is complete. As the print paper comes out of the rear side a few times during printing, make sure to spare enough space behind the printer by using the paper protector, etc., during printing. Unable to print. • You cannot print movies. x Printed results The printed pictures are poor in quality. • Dust is on the ink ribbon. Wipe the plastic part of the ink ribbon and remove dust. • Dust or fingerprints are imprinted on the printed surface. Do not touch the printing surface (the glossy side with no imprint). Fingerprints on the printing surface may result in imperfect printing. • Used print paper or ink ribbon is being used again. Do not use a used print paper. Printing an image twice on the same paper will not make the printed image thicker. Doing so may cause a malfunction. The picture quality and colors of the image previewed on the screen of the camera differ from the ones actually printed. • Colors and quality of an image varies depending on the characteristics of the monitor or the LCD screen. The image displayed on the screen is used as reference only. The image is not printed full size within print range. • The print range differs depending on the image size. (tpage 30) The printed image is crooked. • The paper tray is not inserted properly. Re-insert the paper tray firmly and straight until it reaches the end. An image rotated on the camera does not appear as it is on the print paper. • When you try to print a rotated image, the printer prints the image before the rotation. x Viewing images with the TV Images/sounds cannot be played back on a TV. • The audio cannot be output when only the component video cable is connected. Connect the A/V connecting cable to the audio jack corresponding to the component video jack. • The HD component video out setting of the camera may not be correct. Refer to the operating instructions supplied with the camera, and set the “COMPONENT” setting correctly. Images cannot be output via the A/V connecting cable. • If the component video cable is connected to the printer and the TV, unplug the component video cable from the printer. x Others Cannot insert the ink ribbon easily. • Remove the ink ribbon and then re-insert it. Only when the ink ribbon is too slacked to be loaded, wind the ink ribbon in the direction of the arrow to remove the slack. (tpage 14) The ink ribbon cannot be removed. • Keep the paper tray inserted and turn off the 1 (on/standby) button and then turn it on. After the initial motion stops, remove the ink ribbon. If this does not solve the problem, contact Sony service facilities or your Sony dealer. The print paper is not ejected. • If the ERROR indicator flashes rapidly, the paper is jammed. See “If paper jams” (tpage 25) and remove the jammed paper from the printer. If the jammed paper cannot be removed, contact the Sony service facilities. • If the ERROR indicator lights, re-start printing after the print paper is removed. See “If paper jams” (tpage 25) and remove the jammed paper from the printer. If the jammed paper cannot be removed, contact the Sony service facilities. Printing stops midway. • If the ERROR indicator flashes rapidly, the paper is jammed. See “If paper jams” (tpage 25) and remove jammed paper from the printer. If jammed paper cannot be removed, contact the Sony service facilities. Buttons on the remote control do not work, a...