Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
TOUGH-8010, STYLUS TOUGH-6020/. TOUGH-6020: up to 3 hours, STYLUS TOUGH-3000/ . TOUGH-3000: up to 2.5 hours). If the indicator lamp does not light, the AC adapter is not connected to the camera correctly, or the battery, camera, or AC adapter may be broken. For details on the battery and the AC adapter, see “Battery, USB-AC adapter (included), Charger (sold separately)” (p. 63). Battery can be charged by connecting the camera to the computer. However, when charging with the system other than Windows XP (SP2 or later)/Windows Vista/ Windows 7, charging takes much time. When to charge the batteries Charge the battery when the error message shown below appears. Flashes in red 44 BATTERY EMPTY 14M Monitor top left Error message EN 13 When not using a computer See the next section under “Setting the date, time and time zone.” When using a computer with system other than Windows XP (SP2 or later)/ Windows Vista/Windows 7 Connect the camera to the computer and copy the instruction manual PDF file for your language in the “Manual” folder in the internal memory of the camera. Setting the date, time and time zone The date and time set here are saved to image file names, date prints, and other data. 1 Press the nbutton to turn on the camera. .The date and time setting screen is displayed when the date and time are not set. MENU -------Date and time setting screen 2 Use FG to select the year for [Y]. MENU 3 Press I to save the setting for [Y]. :..2010 XY/M/D Y M D TIME MENUCANCEL 0000 4 As in Steps 2 and 3, use FGHI and the A button to set [M] (month), [D] (day), [TIME] (hours and minutes), and [Y/M/D] (date order). For precise time setting, press the Abutton as the time signal strikes 00 seconds. To change the date and time, adjust the setting from the menu. [X] (Date/time) (p. 47) 5 Use HI to select the [x] time zone and then press the Abutton. .Use FGto turn daylight saving time ([SUMMER]) on or off. ’10.02.26 12:30 SUMMER OKSET SeoulTokyoSeoul Tokyo The menus can be used to change the selected time zone. [WORLD TIME] (p. 48) 14 EN EN 15 Changing the display language The language for the menu and error messages displayed on the monitor is adjustable. 1 Display the [SETUP] menu. “Using the Menu” (p. 4) 2 Use FG to select the r (Settings 1) tab and then press I. COPY ENGLISH RESET USB CONNECTION PC MENU OK MEMORY FORMAT DATA REPAIR EXIT SET 1 2 3 1 2 INTERNAL/SD AUTO 3 Use FG to select [l] and press the A button. 4 Use FGHI to select your language and press the A button. 5 Press the m button. Inserting the SD/SDHC memory card (sold separately) Always use SD/SDHC memory cards with this camera. Do not insert other types of memory card. “Using a SD/SDHC memory card” (p. 64) Although the camera can store images in internal memory, SD/SDHC memory cards (sold separately) can be also used to store pictures. 1 Insert the card straight until it clicks into place. Do not touch the contact area directly. 2 STYLUS TOUGH-8010/ . TOUGH-8010 STYLUS TOUGH-6020/ . TOUGH-6020 STYLUS TOUGH-3000/ . TOUGH-3000 1 2 3 1 2 Close the battery/card/connector cover fi rmly so that lock makes the clicking sound. “Number of storable pictures (still images)/ Continuous recording length (movies) in the internal memory and SD/SDHC memory cards” (p. 66) To remove the SD/SDHC memory card 1 2 Press the card in until it clicks and comes out slightly, then remove the card. Write-protect switch Contact area Shooting, Playbac k, and Er asing Shooting with the optimum aperture value and shutter speed (Pmode) In this mode, automatic shooting settings are activated while also allowing changes to a wide range of other shooting menu functions, such as exposure compensation, white balance, etc. as needed. 1 Press the nbutton to turn on the camera. Pmode indicator 14M44 PP 0.00.0 AUTOWBAUTO WB AUTOISOAUTO ISO 00:3400:34 Number of storable still pictures (p. 66, 67, 68) Monitor (standby mode screen) If Pmode is not displayed, press the m button to display the function menu screen and then set the shooting mode to P. “Using the Menu” (p. 4) Current shooting mode display 44 0.00.0 AUTOWBAUTO WB AUTOISOAUTO ISO PROGRAM AUTOPROGRAM AUTO 14M PP Press the nbutton again to turn off the camera. 2 Hold the camera and compose the shot. Monitor Horizontal grip Vertical grip When holding the camera, take care not to cover the flash with your fingers, etc. 3 Press the shutter button halfway down to focus on the subject. .When the camera focuses on the subject, the exposure is locked (shutter speed and aperture value are displayed), and the AF target mark changes to green. .The camera was unable to focus if the AF target mark flashes red. Try focusing again. AF target mark Press halfway Shutter speed Aperture value “Focusing” (p. 60) 16 EN 4 To take the picture, gently press the shutter button all the way down while being careful not to shake the camera. Press fully PP1/400F3.91/400F3.9Image review screen To view images during shooting Pressing the qbutton enables playback of im...
Otros modelos de este manual:Cámaras - µ TOUGH-6020 (2.6 mb)
Cámaras - µ TOUGH-8010 (2.6 mb)