Votos - 4, Puntuación media: 4.5
(
)
)
|
Resumen del manual
It can be used in cases such as when the background music files are damaged and cannot be played. 1t(Settings) t (Main Settings) t [Format Music] t [OK] zRestoring the music preset at the factory to the camera You can use “Music Transfer” in the CD-ROM (supplied) to reset music files to the preset ones. 1Execute [Download Music], then make a USB connection between the camera and a computer. 2Start “Music Transfer”, then restore the default music. • For details on using “Music Transfer”, see the help in “Music Transfer”. 111GB contents Operation Search MENU/Search Index Power Save Sets the length of time until the LCD screen goes dark and the time until the camera turns off. If you do not operate the camera for a certain period of time while the power is on using the battery pack, the screen goes dark and the camera later turns off automatically to prevent wearing down the battery pack (Auto power-off function). 1 t (Settings) t (Main Settings) t [Power Save] t desired mode Stamina Proactively saves the battery power. If the camera is not operated for a certain period of time, the power turns off automatically. In shooting mode, the LCD screen automatically goes dark before the power turns off. Standard If the camera is not operated for a certain period of time, the power turns off automatically. In shooting mode, the LCD screen automatically goes dark before the power turns off. It takes longer before the power turns off than when set to [Stamina]. Off Does not use the Auto power-off function. Note • The camera does not turn off automatically in the following situations: – During slideshow – When playing back movies – During Eye-Fi connection 112GB contents Operation Search MENU/Search Index TransferJet You can select TransferJet communication settings. TransferJet is a close-up, wireless transfer technology that allows data to be transferred by closely aligning two products that you want to communicate with each other. To find out whether your camera is equipped with the TransferJet function, check for the (TransferJet) mark on the bottom of the camera. Using a Memory Stick with TransferJet (sold separately) allows images to be transferred between TransferJet-compatible devices. For more details on TransferJet, see the Operating Instructions supplied with Memory Stick with TransferJet. 1t(Settings) t (Main Settings) t [TransferJet] t desired mode • [TransferJet] is always set to [Off] during Easy Mode. • While aboard an airplane, set [TransferJet] to [Off]. In addition, always follow all regulations governing the location in which the camera is being used. • The connection is cut if transfer cannot be made within about 30 seconds. If this happens, select [Yes] and again align two (TransferJet) marks on the camera and another device. • Memory Stick with TransferJet and camera models with TransferJet are not sold in some countries and regions due to local laws and regulations. • Set the [TransferJet] function to [Off] in countries and regions other than where you purchased your camera. Depending on the country or region, if you use the TransferJet function, you may be liable due to local restrictions on transmission of electromagnetic waves. zWhat is TransferJet? TransferJet allows you to share images by sending and receiving image data. Insert a Memory Stick with TransferJet in your camera and align two (TransferJet) marks of the camera and another device that supports this function. For details on image transfer, see page 78. On Communicates using TransferJet. Off Does not communicate using TransferJet. Notes 113GB contents Operation Search MENU/Search Index On Eye-Fi Sets whether to use the upload function of an Eye-Fi card (commercially available), when you use the Eye-Fi card with this camera. [Eye-Fi] is displayed only when the Eye-Fi card is inserted in the camera. 1 t (Settings) t (Main Settings) t [Eye-Fi] t desired mode Uses the upload function. The Eye-Fi mode display icon on the LCD screen will change depending on the communication mode of the Eye-Fi card. Eye-Fi card is in standby mode. There is no image to be sent. Eye-Fi card is in upload standby mode. Eye-Fi card is in connecting mode. Eye-Fi card is uploading images. An error has occurred. Off Does not use the upload function. Notes • As of March 2010, Eye-Fi cards are sold in the U.S.A., Canada, Japan and some countries in the European Union. • For more information on the Eye-Fi card, contact the manufacturer or seller of Eye-Fi cards directly. • Eye-Fi cards are permitted only in the countries and regions in which they were purchased. You may be held liable due to local restrictions. • The Eye-Fi card has a wireless LAN function. Do not insert the Eye-Fi card where wireless LAN is prohibited, such as while aboard an airplane. If the Eye-Fi card is inserted, set [Eye-Fi] to [Off]. When the uploading function of the Eye-Fi card is set to [Off], is displayed on the LCD screen. Transferring image data using the Eye-Fi card 1 Set the wireless L...
Otros modelos de este manual:Cámaras - DSC-T99 (3.31 mb)