Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
Charging may take longer depending on conditions of use and circumstances. • Connect the battery charger to the nearest wall outlet (wall socket). • When charging is finished, disconnect the power cord (mains lead) and the battery charger from the wall outlet (wall socket), and remove the battery pack from the battery charger. • Be sure to use the battery pack or the battery charger of the genuine Sony brand. x Battery life and number of images you can record/ view Battery life (min.) No. of Images Shooting still images Approx. 115 Approx. 230 Viewing still images Approx. 250 Approx. 5000 Shooting movies Approx. 90 — Notes • The number of images that can be recorded is an approximate number when shooting with a fully charged battery pack. The number may be less depending on the circumstances. • The number of images that can be recorded is when shooting under the following conditions: – Using Sony “Memory Stick PRO Duo” media (sold separately). – When a fully charged battery pack (supplied) is used at an ambient temperature of 25°C (77°F). GB • • – [LCD Brightness] is set to [Normal]. – Shooting once every 30 seconds. – The zoom is switched alternately between the W and T ends. – The flash strobes once every two times. – The power turns on and off once every ten times. • The battery life for movies is when shooting under the following conditions: – Recording mode: 720 FINE – When continuous shooting ends because of set limits (page 26), press the shutter button down again and continue shooting. Shooting functions such as the zoom do not operate. zUsing the camera abroad You can use the camera and the battery charger (supplied) in any country or region where the power supply is within 100 V to 240 V AC, 50/60 Hz. An electronic transformer (travel converter) is unnecessary. Do not use an electronic transformer, as this may cause a malfunction. GB Inserting the battery pack/a memory card (sold separately) 1 Open the cover. 2 Insert a memory card (sold separately). With the notched corner facing as illustrated, insert the memory card until it clicks into place. Note the notched corner facing the correct direction. 3 Insert the battery pack. Align the battery pack with the guide arrow inside the battery insertion slot. Then, insert the battery pack until the battery eject lever locks into place. Battery eject lever 4 Close the cover. • Closing the cover with the battery inserted incorrectly may damage the camera. GB x x The following memory cards are compatible with this camera: “Memory Stick PRO Duo” media, “Memory Stick PRO-HG Duo” media, “Memory Stick Duo” media, SD memory card, SDHC memory card and SDXC memory card. However, all memory cards are not guaranteed to work with this camera. MultiMediaCard cannot be used. • In this manual, the term “Memory Stick Duo” media is used to refer to “Memory Stick PRO Duo” media, “Memory Stick PRO-HG Duo” media and “Memory Stick Duo” media, and the term “SD card” is used to refer to SD memory card, SDHC memory card and SDXC memory card. • When recording movies, it is recommended that you use the following memory cards: – (Mark2) (“Memory Stick PRO Duo” (Mark2) media) – (“Memory Stick PRO-HG Duo” media) – SD memory card, SDHC memory card or SDXC memory card (Class 4 or faster) For details on the number of images/time that can be recorded, see page 25. Note • Images recorded on an SDXC memory card cannot be transferred or played back on computers or AV devices that are not exFAT-compatible, even when the camera is connected to the computer or AV device using a USB cable. Before connecting, make sure that the device is exFAT-compatible. If connected to a device that is not exFAT-compatible, a format drive request may appear. Do not format the drive, or all data will be lost. (exFAT is the file system used by SDXC memory cards.) x To remove the memory card Make sure that the access lamp is not lit, then push the memory card in once. Access lamp Note • Never remove the memory card/the battery pack when the access lamp is lit. This may cause damage to data or the memory card. GB x x Images are stored in the camera’s internal memory (approximately 32 MB). To copy images from the internal memory to a memory card, insert a memory card in the camera, then touch t (Settings) t (Memory Card Tool) t [Copy]. x To remove the battery pack Battery eject lever Slide the battery eject lever. Be sure not to drop the battery pack. x Checking the remaining battery charge A remaining charge indicator appears on the LCD screen. High Low Notes • It takes about one minute until the correct remaining charge indicator appears. • The remaining charge indicator may not be correct under certain circumstances. • When [Power Save] is set to [Standard] or [Stamina], if you do not operate the camera for a certain period of time while the power is on, the LCD screen becomes dark, then the camera turns off automatically (Auto power-off function). • To keep clean battery pack terminal and prevent short-circuit...
Otros modelos de este manual:Cámaras - DSC-T99 (1.83 mb)