Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
* When SSM lenses or SAM lenses compatible with DMF are used, you can change the focus mode from the camera, even if the focus mode switch on the lens is set to AF. For details on lenses compatible with [Depth Map Assist Continuous AF] and the assist area of the AF Range Control feature, visit the Sony web site in your area, or consult your Sony dealer or local authorized Sony service facility. Autofocus 1 If the lens is equipped with the focus mode switch, set it to AF. 2 Fn button t (Focus Mode) t other than (DMF) or (Manual Focus) 91 Adjusting the Adjusting the focus Adjusting the focus • When the focus is confirmed, the focus indicator changes to z or (page 93). • The AF area where the focus has been confirmed turns green. AF area Focus indicator (Single-shot AF) The camera focuses and the focus is locked when you press the shutter button halfway down. (Automatic AF) The Focus Mode is switched between Single-shot AF and Continuous AF according to the movement of the subject. When you press and hold the shutter button halfway down, if the subject is motionless, the focus is locked and if the subject is in motion, the camera continues to focus. (Continuous AF) The camera continues to focus while the shutter button is pressed and held halfway down. • The audio signals will not sound when the subject is in focus. • Focus-lock cannot be used. (Depth Map Assist Continuous AF) In addition to the Continuous AF function, the camera continues to focus on a subject using the assist area. This option can be selected only when a compatible lens is attached. • The AF assist function works after the camera focuses on a subject using the 19 AF areas. You cannot use only the assist area to focus. Assist area Focus indicator Shooting techniques • Use [Single-shot AF] when the subject is motionless. • Use [Continuous AF] or [Depth Map Assist Continuous AF] when the subject is in motion. • When you want to focus on a subject that moves from side to side and/or up and down among the 19 AF areas, use [Depth Map Assist Continuous AF]. Adjusting the focus Adjusting the focus To select the AF area used for focusing, set up [AF area] (page 95). • To change the focusing speed, set up [AF drive speed] (page 38). Notes • While the camera is focusing automatically, some lenses do not allow you to touch the rotating focusing ring. • The assist area of the [Depth Map Assist Continuous AF] function may not work properly in the following cases: – Under insufficient light. – When the drive mode is set to Hi of [Cont. Shooting] or bracket. – When the exposure mode is set to Tele-zoom Continuous Priority AE or [Sports Action] in Scene Selection. Focus indicator Focus indicator Status z lit Focus locked. Ready to shoot. lit Focus is confirmed. Focal point moves following a moving subject. Ready to shoot. lit Still focusing. You cannot release the shutter. z flashing Cannot focus. The shutter is locked. Subjects that may require special focusing Using the autofocus, it...
Otros modelos de este manual:Cámaras - SLT-A99V (2.76 mb)