486.242221, 486.242241 CAUTION: • Safety Before using this product, read this • Assembly manual and follow all Safety Rules _ ^ and Operating Instructions. • operation • Maintenance • Parts Sears, Roebuck ayd Co., Hoffmay Estates, IL 60179 U.S.A. PRINTED IN U.S.A. FORM NO. 40734 Rev (06/11/09) TABLE OF CONTENTS Safety Rules............................................ ........................i Maintenance Schedule................... ...............................13 Warranty..........

Insert two hex bolts (B) through the brackets, with the rear hex bolt between the cross bolts in the hitch tubes. Secure the hex bolts (B) with two nylock nuts (E). See fi gure 4. Do not tighten yet. • Assemble the two spacers (J) onto the hitch pin and secure the pin with the hairpin cotter (K). See fi gure 4. NYLOCK NUTS (E) BENT HITCH BRACKET HITCH BRACKET ASSEMBLY HEX BOLTS (B) SPACERS (J) HAIRPIN COTTER (K) 10" HEX BOLT (C) HITCH TUBE (L.H.) PLASTIC TIE NYLOCK NUT (E) TUBE MARKED “77L” HOUS

ESTA GARANTIA TIENE VALIDEZ SOLAMENTE MIENTRAS EL PRODUCTO SE ENCUENTRA EN USO EN LOS ESTADOS UNIDOS. Esta garantía le da derechos legales específicos, y usted puede tener otros derechos los cuales varían de un estado a otro. Sears, Roebuck and Co., D/817WA, Hoffman Estates, II60179 ASPIRADORA PARA JARDINES ATENCION: Antes de usar este producto, lea este manual y respete todas las reglas de seguridad e instrucciones de manejo. ESPECIFICACIONES DEL PRODUCTO Potencia: 4.5 caballos de fuerz

Hitch Bracket Connects the sweeper to the towing vehicle. Adjusts for various height tractor hitches. HOW TO USE YOUR SWEEPER DUMPING OF SWEEPER • Your sweeper can be dumped easily without getting off of the rider or tractor. Simply pull the rope forward to dump the hopper. Always empty hopper after each use. BRUSH HEIGHT ADJUSTMENT • To adjust your sweeper brushes to the best operating height, loosen the adjustment knob and push down on the height adjustment lever to raise the brush, or push up

PARA ENCENDER EL MOTOR 1. Conecte el cable de la bujia y la manga de goma a la misma. 2. El boton del interruptor de bolsa / canal debe quedar presionado totalmente por la punta de la aleta delantera situada en la manija de la bolsa o en el canal de soplado, ya que en caso contrario el motor no arrancara. 3. Compruebe que el cable del interruptor de la bolsa / canal este conectado al motor y que este conectado a tierra mediante la mensula de montaje. 4. El tanque de combustible debe llenarse a 3

• Operation • Maintenance • Parts Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. FORM NO. 40258 (06/06) TABLE OF CONTENTS SAFETY RULES..............................................................2 CARTON CONTENTS.....................................................3 HARDWARE PACKAGE ..................................................3 ASSEMBLY......................................................................4 OPERATION................................................................

Only responsible contact with your bodY pr cl_qthing,st_p the machine, individuals who are familiar with these rules of safe allow it to cool, disconnect the spark plug wire from the operation should be allowed to use your unit. spark plug and move it away from the spark plug Keep the area of operation clear of all persons, before attempting to unclog, inspect or repair. particularly small children and pets. Stop the engine Never operate unit without vacuum bag and discharge when they are in the

• Limpie la gasolina derramada sobre el motor y el equipo. Traslade la maquina a otra zona. Espere 5 minutos antes de encender el motor. • Nunca almacene la maquina o el recipiente de combustible en un espacio cerrado donde haya fuego, chispas o luz piloto (por ejemplo, hornos, calentadores de agua, calefactores, secadores de ropa, etc.) • Para reducir el riesgo de incendio mantenga la maquina limpia de pasto, hojas y de acumulacion de otros desechos. Limpie los derrames de aceite o combustible

. Keeping the edge of deck adapter as close as possible to the offset in the adapter bracket, see if the slot in the adapter bracket can be aligned with one or two of the deflector holes in your mower deck’s discharge opening. If the bracket can not be located correctly using existing holes, it will be necessary to drill one or two 5/16" diameter holes in the deck. See figure 25. DECK ADAPTERMOWER DECKADAPTER BRACKETKeep edge of adapter as close as possible to offset in bracketUse existing holes

Tighten only finger tight. See figure 17. ------ FIGURE 17 FIGURE 15 9 STEP 18 - ASSEMBLE PIVOT ROD • Slide the end of the pivot rod through the upper hopper tube and the hopper mount clamps on one side of the hopper. Place a hopper support strap and then a bag arm tube onto the rod. Slide the rod through the stitched sleeve at the front edge of the wind screen, and then place another bag arm tube and a hopper support strap onto the rod. Slide the rod through the other upper hopper tube and