No. Part No. Qty. Description Ref. No. Part No. Qty. Description 1 48646 1 Hitch Tube, R.H. 42 43661 4 Bolt, Hex 1/4-20 x 1" Lg. 2 48645 1 Hitch Tube, L.H. 43 25102 2 Dust Cover 3 24950 1 End Plate, R.H. 44 48471 2 Tube, Hopper Frame (Rear) 4 24951 1 End Plate, L.H. 45 48467 2 Tube, Upper Hopper Frame (Front) 5 24989 1 Wrapper 46 48728 2 Tube, Lower Hopper Frame (Front) 6 43175 2 Bolt, Hex 1/4-20 x 1/2" Lg. 47 48402 4 Plastic Plug 7 C-9M5732 6 Rivet, Pop 48 48396 1 Hopper Bag 8 23887 1 B

El mejor ajuste es cuando la graduacion del cepillo esta 1,2 cm por debajo de la superficie del prado, dentro del cesped. Siempre corte el cesped a una altura pareja, antes de barrer. VELOCIDAD DE BARRIDO Ensaye una velocidad inicial de aproximadamente 3 millas por hora (5km/hora) (tercera velocidad en la mayoria de los tractores). Dependiendo de las condiciones, puede ser necesario ajustar la velocidad de barrido, a fin de obtener los mejores resultados. VACIADO DE LA BARREDORA Su barredora se

45-02181 26" LEAF/LAWNSWEEPER Safety Assembly Operating Maintenance Repair Parts CAUTION: Read Rules for Safe Operation and Instructions Carefully thefastest way to purchase parts PRINTED IN USA FORM NO. 40261 (4/24/07) SAFETY RULES Remember, any equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times when using this equipment. CAUTION: VEHICLE BRAKING AND STABILITY MAY BE AFFECTED WITH THE ADDITION OF AN AC

See figure 13. HINT: Push in on hex bolts as you tighten to form threads. 23. Connect the hose adapter to the engine housing by fastening three wing nuts to the pre-assembled bolts in the engine housing. See figure 13. 25. Place the hose hanger rod down into the hose hanger bracket on the impeller housing assembly. See figure 15. NYLON WASHERWING NUT5/16" X 3/4" HEX BOLT(SELF TAP) FIGURE 15 FIGURE 13 CLAMPHOSEHOSE ADAPTER(NOZZLE) 29. Assemble the hitch plate to the tractor hitch if: a. Your trac

Retire toda la ferreteria y todas las partes sueltas de la caja y verifique que todas las partes y sujetadores que se muestran en las paginas 2 y 3 han sido incluidos. ESPANOL ARMADO DE LA BARREDORA Nota: La mano derecha y la izquierda se determinan desde la posicion del operador sentado en el vehiculo de arrastre. Nota: las figuras del armado se encuentran en las paginas de 5 a 10. 1. (Figura 1) Fije la mensula de angulo en la carcaza de la barredora usando un perno hexagonal (F) y una tuerca d

Be aware of changing conditions on slopes. 1. Inspect the Mow-N-Vac to make sure all covers (rear door, vinyl boot, elbow, hose adapter (nozzle), hose and deck adapter are properly attached. 2. Check tires for proper inflation (12 - 14 lbs). 3. Check oil and gas in Mow-N-Vac engine. 4. Begin operation at low speed, adjusting forward speed to match grass height and/or moisture condition to prevent clogging. 5. Do not attempt to vacuum up any material other than vegetation found in a normal yard,